Table of Contents
Advertisement
Changing a wheel
Procedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle.
Access to the tools
The tools are installed in the boot under the
floor.
To gain access to them:
open the boot,
raise the floor,
secure it by hooking its cord on the hook
on the rear shelf support,
with a standard size spare wheel, unclip
and remove the box in the middle of the
wheel containing the tools,
or
with a "space-saver" spare wheel; lift the
wheel at the rear towards you for access to
the storage box containing the tools.
List of tools
All of these tools are specific to your vehicle.
Do not use them for other purposes.
1.
Wheelbrace.
For removing the wheel trim and the wheel
fixing bolts.
2. Jack with integral handle.
For raising the vehicle.
Practical information
Wheel with trim
When removing the wheel , detach the
trim first using the wheelbrace 1 pulling
at the valve passage hole.
When refitting the wheel , refit the trim
starting by placing its notch facing the
valve and press around its edge with
the palm of your hand.
3. "Bolt cover" tool.
For removing the bolt protectors (covers)
on alloy wheels.
4. Socket for the security bolts (located in the
glove box).
For adapting the wheelbrace to the special
"security" bolts.
255
Advertisement
Table of Contents
