Operating The Shutter Remotely - Canon PowerShot SD900 User Manual

Operating the Shuner Remotely
You can record still images by using a computer to control the shutter of a connected camera.
This is particularly useful for checking images on the larger display of the computer as you
record them and for high volume photography without worrying about filling the camera's
memory card.
1
Attach the supplied interface cable to the computer1s USB port and the camera1s
DIGITAL terminal and place the camera in the correct mode for connecting.
• Methods for connecting the camera to the computer and placing it in
the correct mode for connecting vary between camera models. Please
refer to the Camera User Guide.
• Perform the settings described in First Time Camera is Connected to a
Computer (p. 17) the first time you connect the camera to the
computer.
The Camera Control Window will display.
2
Open the lens cover or remove the lens cap on models equipped with them.
Proceed to the next step if you r model does not have one.
3
Click the [Remote shooting] tab.
4
Click [Starts Remote Shooting].
Remote Shooting
5
Select a destination for the captured images and click [OK].