Connecting To The Mains - Sanyo EM-X475S Instruction Manual

Connecting to the mains

The oven is delivered with the power cord and a plug for 230V, 50Hz, earthed socket outlet.
Earth protection minimises the risks should a short circuit occur. Check to ensure the voltage of
the oven matches the supply.
N.B. If the oven is connected to the socket via an extension cord, make sure the cord is earthed.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
GREEN AND YELLOW
BLUE
BROWN
If you fit your own plug, the colours of the wires in the mains lead of your appliance may not
correspond with the markings identifying the terminals in your plug, proceed as follows:
This appliance must not be used on a non-earth protected power supply.
Contact an electrician if you are uncertain regarding electrical connection of
the oven or provision of earth protection of the supply.
This appliance must be earthed. If this appliance is fitted with a non-
rewireable plug for which your socket is unsuitable, the plug should be cut off
and the appropriate plug fitted. If it is necessary to change the fuse in a non-
rewireable plug, the fuse cover must be refitted. If the fuse cover is lost or
damaged, the plug must not be used until a replacement is obtained.
• Connect the green and yellow (earth) wire to the terminal in
the plug which is marked with the letter "E" or the earth
symbol (
• Connect the blue (neutral) wire to the terminal in the plug
which is marked with the letter "N" or coloured black.
• Connect the brown (live) wire to the terminal in the plug
which is marked with the letter "L" or coloured red.
EARTH
NEUTRAL
LIVE
) or coloured green and yellow.
9