Gigabit smart diagnostic media converter (2 pages)
Summary of Contents for AAxeon FCU-2802SC
Page 1
10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter User’s Manual...
Page 2
fi tness for a particular purpose. This is a Class A product. In a domestic environment, this Aaxeon has made every effort to ensure that this User’s Manual product may cause radio interference, in which case the user is accurate; Aaxeon disclaims liability for any inaccuracies or may be required to take adequate measures.
● Provides DIP switch for LFP function (Disable / Enable) setting mini GBIC SFP module is not bundled with the ● Compact in size, easy installation package. Note ● OAM (TS-1000 and IEEE 802.3ah) supported ● 9K Jumbo frame supported ● Can be installed on Aaxeon’s Media Converter Chassis...
3. PRODUCT OUTLOOK Real Panel Overview Real Panel TOP Panel Bottom TOP Panel Bottom Front Panel Figure 2: SFP Model Front Panel Figure 1: Multi-Mode/Single-Mode Duplex Model...
Page 6
Real Panel TOP Panel Bottom Figure 4: Multi-Mode/Single-Mode Duplex Model Figure 5: SFP Model Front Panel Figure 3: WDM (Single-Strand Fiber) Model Left View The Front Panel of the Gigabit Ethernet Media Converter consists of one 1000Base-SX / 1000Base-LX / mini-GBIC SFP / 1000Base- Figure 6: WDM (Single-Strand Fiber) Model LX WDM ports and one Auto-Sensing 10/100/1000Mbps Ethernet RJ-45 Port, one DIP switch for LFP ON/OFF.
Rear View 4. LINK FAULT PASS THROUGH (LFP) The rear panel of the Gigabit Ethernet Media Converter indicates function includes Link Fault Pass Through one DC jack, which accepts input power with 5V DC 2A. function (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately alert administrators about problems with the link media and provide an effi...
Page 8
If the connection breaks, the FCU-280x link loss forwards to the switch/hub that generates a trap to the management station. Management Switch/Hub Media Media Switch/Hub Station Station w/SNMP Converter Converter The administrator can then determine the source of the issue. LFP ON LFP OFF Fiber...
LEDs should light when all cables are attached. Figure 9: SFP Model installation It’s recommended that Aaxeon SFP Modules be used in the Aaxeon converters. If you insert a SFP Figure 8: FCU-280x installation transceiver that is not supported, the converter Note will not recognize it.
6. DUPLEX MODE SUPPORT 7. LED INDICATION FCU-280x one-channel media conversion Color Description between 10/100/1000Base-T 1000Base-SX/LX. Green Lit: When +5VDC power detected. 10/100/1000Base-T port can work under Auto-negotiation mode. However, the 1000Base-SX/LX fi ber port only works under forced Lit: To indicate the link through that fi ber 1000Mbps full duplex mode.
8. CABLE CONNECTION PARAMETER 9. PRODUCT SPECIFICATION The FCU-280x comes with the following standard features: The wiring details are as below: Cables: 2802WA-S10 Model: FCU- 2802SC 2802SC-S10 2805SFP 2802WB-S10 Standard Fiber Type Cable Specifi cation Hardware Version Version 3 1000Base-SX Multi-mode 50/125μm or 62.5/125μm SC-type connector...
Page 12
10/100/1000Base-T: 1000Base-T-2-pair UTP Cat. 5/5e/6, up to 100m 1000Base-SX : 50/125μm or 62.5/125μm multi-mode fi ber optic cable, up to 220/550m (SC) Cable 1000Base-LX : 9/125μm single-mode fi ber optic cable 9/125μm single-mode fi ber optic cable, up to 10/15/20/30/40/50/60/70/120km (vary on fi ber transceiver or SFP module) TS-1000, IEEE 802.3ah terminal Jumbo Packet Size...