Brinno TimeLapseATM100 User Manual

Motion Sensor
ATM100 ATM100
User Manual User Manual
w w w . b r i n n o . c o m w w w . b r i n n o . c o m
Package Contents
1. ATM100 Motion Sensor x1
2. Magnetic holder x1
3. Metal Lens ring x2
Parts of ATM100
1
1. Magnetic Holder
3. Plug
Specification
Dimension 56(W)x34(L)x23(D) mm
Weight 10 g
Waterproof IP54
Detect Distance 4m
Detect Angle 90˚
4. User manual
2
3
2. Motion Sensor
Installation on TLC200
1. Clean the Time Lapse
Camera lens
(TLC200)
and lens ring, then
place the metal lens
ring included on the
camera lens ring.
2. Attach your
Motion sensor
magnetic holder
to the Time Lapse
Camera
(TLC200)
lens ring, and
insert the plug
into Time Lapse
Camera
(TLC200)
Extension port.
3. Turn on the Time Lapse Camera
and the screen will display Motion mode.
4. Press OK, go to the preview screen.
5. Press OK again for one second, until the
LCD panel turns off, and the Time Lapse
Camera is recording images.
(TLC200)
OK button
READY
Preview screen
During the recording period, the LCD panel will turn off
to save power.
Green LED light: indicates
image capture in process.
When the Green LED light flashes, the Motion
Sensor (ATM100) is activated and the Time Lapse
Camera (TLC200) is capturing photos.
Red LED light: Memory is
full or Battery is empty.
When the SD card memory is full, the Time Lapse Camera
(TLC200) will STOP RECORDING. Please remember to replace
the SD card to continue recording.
e
(TLC200)
Motion mode screen
READY
Preview screen
Hold
Recording...
1 Sec.
LCD turn off