Advertisement
c.
Statesman Console to Senator Flashboard
1. Configure jumpers as follows:
WI-A
W2-C
W3-AandC
2. Reassemble the AIA by replacing the cover and inserting the (4)
four mounting screws.
3. Plug the console adapter cable into one of the Statesman console
flashboard output connectors. Connect the other end to the
Statesman/Pres Input connector on the AlA.
.
4. Plug the flashboard cable into Senator /L V3 connector on the AlA.
5. Plug the power cord into a 120 V AC grounded wall outlet.
6. Modify the ALR PCB in the Senator flashboard. (See section II-B)
3.
4.
5.
6.
D. Statesman Console to BK Flashboard
1. Configure jumpers as follows:
Wl-A
W2~A
W3-A
2.
3.
Reassemble the AlA by replacing the cover and inserting the (4)
four mounting screws.
.
Plug the console adapter cable into one of the Statesman console
flashboard output connectors. Connect the other end to the
Statesman/Pres Input connector on the AlA.
Plug the flashboard cable into theBK Output connector on the AlA.
Plug the power cord into a 120 V AC grounded wall outlet.
4.
5.
E.
".<.-,n.
W3-B
.
2. Reassemble the AlA by replacing the cover and inserting the (4)
four mounting screws.
3. Plug the console adapter cable into your Senator or 600 LV-3
console flashboard output connector. Connect the other end to the
Senator /L V3 Input connector on the AlA.
4. Plug the flashboard cable into the Presidential output connector
on the AlA.
.
5. Plug the power cord into a 120 V AC grounded wall outlet.
6. If you purchased your flashboard before Jan 1991, the AR printed
circuit board requires modification. (See section II-A)
There are no operating controls for the AIA after its hook-up. Simply'
use your bingo system as you normally would. If you are using a
combination of systems that offer fewer display features (i.e., Presi-
dential to Senator), the Senator fIashboard will not display the game
oattern as it would if vou had a Presidential flashboard.
With a Senator console to Presidential flashboard interface, the
Presidential flashboard will display the number of balls called without
the game pattern d.isplay. Honly one ball is called, the numeriCal
display will flash a (1). This is a normal condition-the display will
function normally from 2 thru 75 balls called.
Arrow
Intelligent Adapter Manual
Advertisement
