Advertisement
Installation Instructions
RF4510-EA
RF4510: EXTERNAL ANTENNA
HID is a registered trademark of HID Corporation.
Product
Description
Dimensions
Orientation
Compatibility
Access Control Systems
Proximity Cards
Frequency
Indicators
Supervision
Applications
Frames
Trim Enhancer
Locks
Latchbolts Released*
Environment
Temperature
Humidity
Electrical
Reader Module
Operating Voltage
Operating Current
Electric Strike Module
Operating Voltage
Operating Current
Cable detail
Reader Module
Distance to Host
Recommended Type
Electric Strike Module
Distance to Power
Recommended Type
Certifications
Compliance
Security
Warranty
Electric Strike and Proximity Card Reader with
Antenna Module Mounted Separately in Frame
See pages 4-5
Non handed
Open Architecture
Interfaces with Wiegand Protocol Systems
Supports HID 26 39 Bit Formats
Supports HID 125 kHz Credentials
Red/Green LED and Buzzer
Door Position Switch and Latchbolt Monitor
Metal
Included
Cylindrical; Mortise without Deadbolt
Accomodates up to 3/4" Cylindrical and Mortise
Latchbolts
Suitable for Exterior Doors
32 F 150 F (0 C 65 C)
5 95%, Non-condensing
12VDC +/- 20%
125 mA Max. @ 12VDC
12VDC +/- 10%
240 mA max. @ 12VDC
500 ft. Max.
18 22 AWG (Dependent on Distance)
See Page 3
See Page 3
FCC Part 15/IC Class B USA & Canada
ANSI/BHMA 156.31, Grade 1
Lifetime Waranty against defects
in materials and workmanship
HES, Inc.
22630 N. 17th Ave.
Phoenix, AZ 85027
800-626-7590
Stranded and Shielded
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Assa Abloy RF4510-EA
-
Page 1: Installation Instructions
Installation Instructions HES, Inc. 22630 N. 17th Ave. RF4510-EA Phoenix, AZ 85027 800-626-7590 RF4510: EXTERNAL ANTENNA Product Description Electric Strike and Proximity Card Reader with Antenna Module Mounted Separately in Frame Dimensions See pages 4-5 Orientation Non handed Compatibility Open Architecture... -
Page 2: Product Components
Product Components RF4510: EXTERNAL ANTENNA Deadlatch Tabs & Screws Hybrid Electric Strike Door Position Switch, Press-Fit Magnet Dielectric Grease (for humid applications) and 10” Connector Cable (2 Pin) 24” Cable (connecting reader/antenna and strike) Pigtail Connectors (2 pin, 8 pin & 4 pin) Reader/Antenna Body 3a. -
Page 3: Installation Directions
Installation Directions RF4510: EXTERNAL ANTENNA CAUTION! Before connecting any device at the installation site, verify that there is 12VDC input voltage using a multimeter. Many power supplies and low voltage transformers operate at higher levels than listed. Any input voltage outside the electrical specifications outlined on page 1 may cause severe damage to the unit and will void the warranty. -
Page 4: Horizontal Adjustment
Installation Directions RF4510: EXTERNAL ANTENNA 4500 WITH SCHLAGE AND YALE MORTISE LOCKS DEADLATCH TAB FOR CYLINDRICAL LOCKSET DEADLATCH TAB FOR MORTISE LOCKSET The filler tab for Cylindrical locksets fits The Mortise lock deadlatch tab is aligned with centered in the strike opening and is secured the deadlatch on the lockset and secured by by the deadlatch tab screws as illustrated the deadlatch tab screws as illustrated... -
Page 5: Cutout Templates
Cutout Templates RF4510: EXTERNAL ANTENNA Inches [mm] JAMB CUTOUT DIMENSIONS 1-1/4” 4 -7/8” 1-5/16” 4 -1/8” 105 5/8” 3-5/8” 1” 1” 3/8” Reader/Antenna Hybrid Electric Strike CYLINDRICAL LOCKSETS MORTISE LOCKSETS SCHLAGE L9000 & YALE 8700 LOCKS ONLY Strike Mortise Vertical Strike Vertical Strike... - Page 6 Installation Directions Warning: Changes or modification to this device not expressly approved by HES, Inc., could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a class [B] digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the RF4510-EA and is the answer not in the manual?
Questions and answers