HD DIGITAL RECORDER USER MANUAL Trademarks All brand and product names are trademarks or registered trademarks of Maka GPS Technologies Group. In association with Maka GPS Technologies Private Limited (Singapore), Maka GPS Technologies Sdn. Bhd. (Malaysia) & Maka Technologies Group (H.K.) Limited. The information in this manual is subject to change without notice www.makagps.com 6/2014.
Safety information To prevent injury to yourself and others or damage to your device, read the safety information about your device before using the device. Warning Failure to comply with safety warnings and regulations can cause serious injury or death. Do not use damaged power cords or plugs, or loose electrical sockets Unsecured connections can cause electric shock or fire.
Page 3
Use manufacturer-approved batteries, chargers, accessories, and supplies Using generic batteries or chargers may shorten the life of your device or cause the device to malfunction. They may also cause a fire or cause the battery to explode. Use only Maka GPS Technologies Group-approved battery and charger specifically designed for your device.
Page 4
Extreme temperatures can damage the device and reduce the charging capacity and life of your device and battery. Prevent the battery from coming into contact with metal objects, as this can create a connection between the + and – terminals of your battery and lead to temporary or permanent battery damage.
Page 5
Caution Failure to comply with safety cautions and regulations can cause injury or property damage Do not use your device near other electronic devices Most electronic devices use radio frequency signals. Your device may interfere with other electronic devices. Do not expose the device to heavy smoke or fumes Doing so may damage the outside of the device or cause it to malfunction.
Page 6
Do not store your device in very hot or very cold areas. It is recommended to use your device at temperatures from 0 °C to60 °C and humidity from 10% to 80% Doing so may cause the screen to malfunction, result in damage to the device, or cause the battery to explode.
Page 7
Leaving batteries unused over time may reduce their lifespan and performance. It may also cause the batteries to malfunction or explode, or cause a fire. Your device may wear out over time. Some parts and repairs are covered by the warranty within the validity period, but damages or deterioration caused by using unapproved accessories are not.
Page 9
Correct disposal of this product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste.
Page 10
Disclaimer Some content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal non-commercial use. You may not use any content or services in a manner that has not been authorised by the content owner or service provider.
Page 11
content or service will remain available for any period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which Maka GPS Technologies Group has no control. Without limiting the generality of this disclai mer, Maka GPS Technologies Group expressly disclaims any responsibility or liability for any interruption or suspension of any content or service made available through this device.
About this manual This device provides high quality digital recording device using Maka’s high standards and technological expertise. This user manual is specially designed to detail the device’s functions and features. Please read this manual before using the device to ensure safe and proper use.
Overview of your QB5 HD Digital Roadcorder Device Layout Understanding of your QB5 HD Digital Roadcorder Buttons Status Icons Standard Packaging of your QB5 HD Digital Roadcorder Package Contents Installation of your QB5 HD Digital Roadcorder Installation Charging the Battery...
Getting Started Understanding your QB5 HD Digital Roadcorder and Buttons Buttons Button Functions Press and hold to turn the device on or off. MENU Press to enter and exit Setting mode. MODE Press to toggle between Recording/Camera/Playback mode. Press to navigate UP to the preferred functions required.
Getting Started Standard Packaging of your QB5 HD Digital Roadcorder Package contents Check the product box for the following items: QB5 Camera Operating Manual Mounting suction holder for camera (included 3M & Suction Mount) USB Cable ...
Getting Started Installation of your QB5 HD Digital Roadcorder Installation 1 Fixing the camera to the window mount It is compulsory for window mount to be fixed up before using the device in a car. Make sure that you place the recorder in an appropriate place, so as not to obstruct the driver’s view.
Getting Started Installation of your QB5 HD Digital Roadcorder Charging the battery Use the charger to charge the battery before using it for the first time. Charge the device by connecting front camera via the USB car charger. Use only Maka-approved chargers, batteries, and cables.
Getting Started Installation of your QB5 HD Digital Roadcorder Inserting a memory card Your device accepts memory cards with maximum capacities of 32 GB. Depending on the memory card manufacturer and type, some memory cards may not be compatible with your device.
Getting Started Installation of your QB5 HD Digital Roadcorder Reformatting a memory card keeps data and the structure of files stored on it clean, helping to prevent error messages and missing images. Reformatting also restores the memory card, which can prevent it from becoming corrupted.
Page 26
Getting Started Installation of your QB5 HD Digital Roadcorder 4 Press on OK to confirm your selection 5 Press on DOWN button once 6 Press on OK once the word EXECUTE is highlighted Before formatting the memory card, remember to make backup copies of all important data stored on the device.
Getting Started Operation of your QB5 HD Digital Roadcorder Turning the device on and off Press and hold the Power button for a few seconds to turn on the device. A welcome message will be displayed on screen as shown in the image below.
Getting Started Operation of your QB5 HD Digital Roadcorder Date/ Time Setup Access the following settings to change the device’s time and date. If the battery remains fully discharged or removed from the device, the time and date is reset.
Getting Started Operation of your QB5 HD Digital Roadcorder Take a Video With QB5 HD Digital Roadcorder , you can take both still photos and videos. Recording Mode 1 Press on MENU to enter Video Output Mode 2 Press on UP or DOWN button to navigate to the function that shows...
Getting Started Operation of your QB5 HD Digital Roadcorder Loop Recording The device will continue to record by erasing the previously recorded videos. All old videos will be replaced with the new ones. It is recommended to reformat a memory card every time images are...
Getting Started Operation of your QB5 HD Digital Roadcorder Microphone You may choose to turn off the microphone so that all the recorded videos will be muted. 1 Press on MENU twice to enter SETUP mode 2 Press on UP or DOWN button to navigate to the function that shows...
Getting Started Operation of your QB5 HD Digital Roadcorder Screen Saver Select timer duration for the LCD to turn off after recording starts. 1 Press on MENU twice to enter SETUP mode 2 Press on UP or DOWN button to navigate to the function that shows...
Getting Started Operation of your QB5 HD Digital Roadcorder Motion Detector This function enables you to use your device as a remote surveillance camera with motion detection functionality. It uses the built-in camera to detect movements in the surrounding area using an advanced motion detection algorithm.
Getting Started Operation of your QB5 HD Digital Roadcorder Light Frequency Please set according to the local power supply respectively; 50Hz or 60Hz. 1 Press on MENU twice to enter SETUP mode 2 Press on UP or DOWN button to navigate to the function that shows LIGHT FREQ.: 50Hz/ 60Hz...
Getting Started Operation of your QB5 HD Digital Roadcorder Restore Factory Setting Set the system parameters to the default value. 1 Press on MENU twice to enter SETUP mode 2 Press on UP or DOWN button to navigate to the function that shows...
Getting Started Operation of your QB5 HD Digital Roadcorder Take a Photo With QB5 HD Digital Roadcorder , you can take both still photos and videos. 1 Press on MODE to enter Photo-taking mode 2 Press on MENU to enter Photo Size Setting...
Getting Started Operation of your QB5 HD Digital Roadcorder Delete Files 1 Press on MODE twice to switch from recording to playback mode 2 Press on UP or DOWN button to navigate thru the video files 3 Press on MENU once you have selected the file to delete...
Getting Started Operation of your QB5 HD Digital Roadcorder Volume Press the Volume button up or down to adjust the sound volume when playing video. 1 Press on MODE twice to switch from recording to playback mode 2 Press on MENU...
General Troubleshooting Question Reason Solution The captured image is not 1 MicroSD card might be Make sure to stop recording stored full. before shutting down. 2 Image is not saved before the power outage. All buttons are invalid Procedural error or faulty Press RESET button to restart operation the DVR.
Page 40
General Troubleshooting Question Reason Solution Hazy Images Lens might be dirty. Check if there are fingerprints or dust on the lens. Clean it with a micro fabric cloth if necessary. There are horizontal stripes This could be due to wrong Please set according to the interference on the image light frequency setting...