Inserting A Lancet Drum - Accu-Chek Aviva Owner's Booklet

Inserting.a.Lancet.Drum
You.must.first.load.the.drum.into.the.lancing.device.to.get.it.ready.for.use.
1. Remove the cap by
pulling it straight off. It
is not a twist cap. The
easiest way to do this
is to place your thumb
to the side of the notch
as seen in the
illustration.
NOTE.
Once the drum is inserted into the lancing device, do not remove the drum until completely used. The drum
cannot be reinserted.
correctly.inserted.
drum
2. Insert a new drum,
white end first, until it
stops. It clicks into
place.
3. Slide the cap on until it
stops by aligning the
notch on the cap with
the notch on the
device.
4. You are now ready to
use the first lancet. The
lancet counter on the
device shows a
number 6, meaning
you have 6 new
lancets remaining.
29