Panasonic Lumix DMC-XS3 Operating Instructions For Advanced Features page 107

Transferring images to a PC
∫
1
Connect the computer and camera with the USB connection cable
(supplied).
•
Please turn this unit on and your PC before connecting.
•
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may bend out of shape, which may cause malfunction.)
•
Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (DMW-USBC1: optional).
A USB connection cable (supplied)
B Align the marks, and insert.
2
Press 3/4 to select [PC], and then press [MENU/SET].
•
For Windows:
•
For Mac:
•
If [USB Mode]
automatically connected to the PC without displaying the [USB Mode] selection screen.
•
When the camera is connected to a PC while [USB Mode] is set to [PictBridge(PTP)], a
message may appear on the PC screen. In that case, close the message, and remove the
USB connection cable safely, and then set the [USB Mode] to [PC].
3
Drag and drop files and folders in the camera to the PC.
•
When the image transfer is complete, disconnect the USB connection cable safely.
•
If the remaining battery power becomes low while the camera and the PC are communicating, the
alarm beeps.
Disconnect the USB connection cable safely. Otherwise, data may be destroyed.
•
Before inserting or removing a card, turn the camera off and disconnect the USB connection cable.
Otherwise, data may be destroyed.
Connecting to other equipment
A drive ([Removable Disk]) is displayed in [Computer]
A drive ([NO NAME]) is displayed on the desktop
(P44) is set to [PC] in the [Setup] menu in advance, the camera will be
- 107 -