Table of Contents Introduction Introduction ............2 Congratulations on your purchase of this Button Functions ............ 4 Universal Remote Control. Universal Remotes Setup ..............6 let you replace a broken or lost remote or Battery Installation ..........6 combine more than one remote into one. Battery Saver.............
Button Functions, cont. Button Functions 1. TV, SAT/CBL ,DVD/VCR, DVR Selects product to be operated. 2. Backlighting Turns backlighting on and off. 3. MUTE Turns off the TV sound while the picture remains. 4. CC (SUBTITLE) TV Closed Caption (if your TV has this feature) or DVD Subtitle toggle.
Setup Direct Code Entry Battery Installation To set up your remote to control your TV 1. On the back of the remote, push down on 1. Press and hold the SETUP button until the the tab and lift the cover off. green indicator under a mode button stays 2.
Page 5
Direct Code Entry, cont. Direct Code Entry, cont. To set up your remote to control a Satellite To set up your remote to control a VCR Receiver 1. Press and hold the SETUP button until the 1. Press and hold the SETUP button until the green indicator under a mode button stays green indicator under a mode button stays on, then release the SETUP button.
Direct Code Entry, cont. Direct Code Entry, cont. Most users will store DVD codes under the Write your codes down here for easy reference later. DVD/VCR button, Cable or Satellite codes under SAT/CBL, etc. If (for example) you Type Type stored Code want to store a CD code under DVD/VCR, fi...
Setup, cont. Setup, cont. Programming Combo Device Codes 2. Press and hold the MUTE button until the green indicator blinks off, then release the Some Combo devices (e.g. TV/VCR, TV/DVD, button. DVD/VCR, etc.) will require you to set up two 3.
Code learning Tips on Learning cont. The learning feature lets you “learn” functions h. Keep the distance between the two remotes from your original remote control. For example to approximately 1 inch and do not move or - you may want to use your remote to operate change the distance between the two remotes the RANDOM PLAY feature from your original until you have learned all the required buttons...
Learning Commands Clearing Commands 1. Press and hold the SETUP button until a green To Clear all Learned Commands under a mode indicator turns on, then release the button. 2. Press and release the desired mode button (TV, 1. Press and hold the SETUP button until a green SAT/CBL, etc.), the green indicator blinks then indicator turns on.
Optional Accessories Troubleshooting Your new remote has a “Find Feature” build Remote does not operate your product. in. If you purchase either of the accessories • Press the mode button of the product you want below you can press a button to locate your to control.