Acumen AiP-D6 Instruction Manual page 28

1.1-4 AiP camera address
Once the source is set to an AiP camera, you can enter the IP address of the AiP camera for
that specific channel. To manually set the IP address, press Enter to enable editing via the
virtual keyboard. You can also use WS-Discovery for automatic IP address setup.
1.1-5 AiP camera HTTP port
By default, the HD IP Video Decoder AiP-D6 AiP camera 'HTTP' port is set to 80. This can be
changed if required.
1.1-6 Video RTSP port
By default, the HD IP Video Decoder AiP-D6 AiP camera 'RTSP' port is set to 554. This can be
changed if required.
1.1-7 AiP camera setup
 Camera IP address: the IP address of the AiP camera
 Camera HTTP port: the HTTP port number of the IP address (default 80)
 Video RTSP port: the RTSP port number of the IP address (default 554)
 Username: username of the AiP camera (default: admin)
 Password: password of the AiP camera (default: pass)
1.1-8 WS-Discovery
HD IP Video Decoder AiP-D6 Manual
27