Panasonic BB-HCM311A Operating Instructions Manual page 41

Setting
Default Gateway
(Static/DHCP Only)
DNS Server
Address
*1
(Static/DHCP Only)
Max. Bandwidth
Usage
Connection Type
If you automatically obtain the IP address from the DHCP server, you do not need to set it.
*1
• If you have the assigned Default Gateway address by your
*1
ISP or network administrator, enter it in this data field.
• Set 4 digits (0—255) and 3 periods such as
"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
not available.
• DNS server address is required in the following conditions.
• Transferring camera images by E-mail or FTP
• Setting cameras by their host names on the Multi-
Camera Setup page
• Using the Viewnetcam.com service
• If you have the assigned DNS server addresses by your
ISP or network administrator, enter them in this data field.
They usually have two addresses.
• Set 4 digits (0—255) and 3 periods such as
"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
not available.
• The bandwidth can be restricted.
• Select the maximum bandwidth usage from [Unlimited] to
[0.1 Mbps].
• This setting is valid in both IPv4/IPv6.
Note
Set the maximum bandwidth usage seeing the following
file sizes. These are examples for a JPEG file with a
standard image quality. File sizes may change depending
on the image quality or how bright the object is.
160 x 120 pixels: About 5 KB (40 Kbit)
320 x 240 pixels: About 16 KB (128 Kbit)
640 x 480 pixels: About 33 KB (264 Kbit)
• Select [Auto Negotiation] normally. If you cannot access
the camera, see page 45 "The Top page is not displayed."
in the Installation/Troubleshooting.
• This setting is valid in both IPv4/IPv6.
[For assistance, please call: 1-800-272-7033]
Description
Operating Instructions
41