Image 2-5
Mounting the bolt-spacer assembly
2. Insert the 4 bolt-spacer assembly into the Solaris LC40 suspension holes without tightening the bolts.
Note: The bolts will be tightened after the Solaris LC40 has been hooked up onto the floor stand.
2.3 Installation of the Speaker Set
Hooking the Speakers
1. Open the fixation lock on the speaker suspension by pulling the lock spring (A) to the left.
Image 2-6
Hooking the Speakers
2. Push the open locks (B) of the speaker suspension over the speaker mount spacers (C).
3. Release the lock spring (D).
Securing the Speakers
1. Line up the speaker securing screws (provided onto the speaker suspensions) with the holes in the rear bezel (Formerly, 2 screws
on both side of the rear bezel have been removed).
R5976853 SPEAKER SET SOLARIS LC40 16/12/2004
B
A
1
2
C
B
A
C
2. Installation of the Speaker Set
3
D
C
7