Advertisement
Making a Call
2. Connect the adapter to a standard AC wall
outlet. Only use the travel adapter that
1. Make sure your phone is powered on.
comes included with the package.
2. Enter a phone number including the area
code. To edit a number on the display
screen, press the right/left navigation keys
to move the cursor to desired position or
simply press the
key to erase one
digit at a time.
Warning
]
Press and hold the
key to erase the
]
entire number.
You must unplug the adapter before we
remove the battery from the phone during
3. Press the
key to call the number.
charging; otherwise, the phone could be
4. When finished, press the
key.
damaged.
3. When charging is finished, disconnect
Making a Call by Send Key
the adapter from the power outlet and
1. Press the
key, and the most recent
from the phone by pressing on the gray
incoming, outgoing and missed phone
tabs on both sides of the connector
numbers will be displayed.
while pulling the connector out.
2. Select the desired number by using the
navigation key.
➀
3. Press the
key.
Charging the Battery
➁
➀
Use of unauthorized accessories could damage
your phone and invalidate your warranty.
Notice
To use the travel adapter provided with your
]
If your phone is powered on while charging,
phone:
you'll see the bars in the battery indicator
1. With the battery in position on the phone,
icon cycle.
connect the lead from the travel adapter to
]
If your phone is powered off, the display will
the bottom of the phone. Check that the
show the charging status. 'Charging' or 'Full'
will be displayed.
arrow on the lead connector is facing
towards the front of the phone.
Q&A
Q&A
Q
How do I view the list of outgoing calls, incoming
Q
Why does the phone heat up?
calls and missed calls?
A
The phone may get hot when there is a very long
A
Press the
key.
call duration or when games are played or even
when surfing the Internet for a long time. This has
no effect upon the life of the product or
Q
How do I clear all call history?
performance.
A
Press the left soft key[Menu] and then the
key.
Q
Why is there no ring tone, but only a blinking LCD
screen?
Q
How do I view all numbers stored in memory?
A
Phone may be set to 'Vibration All' or in 'Silent All'
A
Press the left soft key [Menu] and then
mode. In the Sound menu, please select Volume
→
,
key.
Ringtone
Volume 1
~ Volume 5.
Q
Why is the connection inconsistent or not audible
Q
Why does the battery life get shorter in standby
in certain areas?
mode?
A
When frequency environment is unstable in a
A
The battery is worn out. As time passes, the
certain area, connection may be inconsistent and
battery life gradually becomes shorter. If the
not audible. Relocate to another area and try
battery lasts about half the amount of time as
again.
when first purchased, it's time to purchase a new
battery.
Q
Why is the connection not consistent abruptly
disconnects even when established?
Q
Why does the battery run out so quickly during
A
When frequency is unstable or weak or if there are
normal use?
too many users, connection may be cut off even
A
It is due to the user environment or a large number
after it was established. Please try again later or
of calls or weak signal.
attempt after relocating to other areas.
Q
Why is no number dialed when you recall a
Q
Why does the LCD not turn on?
Address Book entry?
A
Remove the battery and turn on the power after
A
Check that the number has been stored correctly
placing it back on. If there is no change, fully
by using the address book Search feature. Re-store
charge the battery and try again.
them, if necessary.
Q
Why is there an echo when a connection is made
Q
I cannot find the lock, PIN, or PUK code. What is
with certain telephones in a certain area?
my password?
A
This is called the 'Echo Phenomenon', where it
A
The default lock code is '0000'. If you forget or
occurs if connection volume is too high or caused
lose the lock code, contact your phone dealer. If
by special properties (semi electronic telephone
you forget or lose a PIN or PUK code, or if you
exchange) of the equipment on the other end.
have not received such a code, contact your
network service provider
→
LG Electronics Canada Inc.
550 Matheson Blvd. E.
Mississauga, Ontario
L4Z 4G3 Canada
LG240
LG240
Q
S
UICK
TART
www.LG.ca
MCDD0009501 (1.0)
G
LG240
Advertisement
