Osd Setup - Black Box AVX-VGA-WI User Manual

Chapter 5: Web Management
DHCP Server Setup:
• You can select "Auto Enable/Disable DHCP Server" or "Disable."
• Start IP: The start IP address of DHCP Server.
• End IP: The end IP address of DHCP Server.
• Subnet Mask: The default value is 255.255.255.0.
• Default Gateway: The default value is 192.168.100.10.
• DNS Server: The default value is 192.168.100.10.
Wireless Setup:
• Wireless LAN: The default value is "Enable."
• Connect to Existing AP: Input the SSID of the Wi-Fi AP you want to connect to.
• Region: The default value is "Worldwide."
• SSID: SSID string, max. length is 32 bytes.
• SSID Broadcast: The default value is "Enable."
• Channel: Use to set fixed channel or Auto. "Auto" means, after powering on the Micro Wireless VGA Presentation Tool, it will
scan all wireless channels and select one channel automatically.
• Encryption: Select "Disable" or one of WEP/WPA/WPA2 64 bit or 128 bit in ASCII or HEX string.
• Key: If Encryption is enabled, you have to set the key value according to the encryption mode you selected.
Apply: Press button to select this mode.
Cancel: Press button to abort action.

5.3.3 OSD Setup

Figure 5-7. OSD Setup screen.
724-746-5500 | blackbox.com
AVX-VGA-WI Page 35