Initial-Digit-Timer; Conference Server Uri; Callback - Busy Uri (Only Hipath 8000); Callback - No Reply Uri (Only Hipath 8000) - Siemens optiPoint 410 S Administrator's Manual

3.3.4.11

initial-digit-timer

Parameter initial-digit-timer
Index –
Value 1 to 120
Example <Item name="
Notes Hot line/warm line
3.3.4.12

Conference server URI

Parameter Conference-factory-uri
Index –
Value URI
Example <item name="conference-factory-uri">uri</item>
Notes e164
3.3.4.13 Callback – busy URI (only HiPath 8000)
Parameter callback-busy-code
Index –
Value URI
Example <item name="callback-busy-code:">uri</item>
Notes Must be set up in HiPath 8000
3.3.4.14 Callback – no reply URI (only HiPath 8000)
Parameter callback-ring-code
A31003-2056-X619-1-76A9, March 25 2006
XML Configuration Management, Administration manual
initial-digit-timer
">15</Item>
XML Overview
Administration Tags
WEB
Time in seconds until the first digit
must be entered after the dial tone.
is also used as a timer for a "warm
line". (numeric
WEB
<conf@<SIP Server IP> (e.g.
conf@172.16.127.95 or domain
name)
WEB
<conf@<SIP Server IP> (e.g.
conf@172.16.127.95 or domain
name)
HiPath 8000 command for Callback
on Busy
WEB
xml_03.fm
3-21