Table of Contents
Advertisement
Unusual Noises:
Either a crack or delamination can cause creaking noises while riding. Think about such a
noise as a serious warning signal. A well maintained bicycle will be very quiet and free of
creaks and squeaks. Investigate and find the source of any noise. It may not be a crack or
delamination, but whatever is causing the noise must be fixed before riding.
WARNING: Do not ride a bicycle or component with any delamination or crack.
Riding a delaminated or cracked frame, fork or other component could lead to
complete failure, with risk of serious injury or death.
C. Understanding
Components
It is often necessary to remove and disassemble components in order to properly and carefully
inspect them. This is a job for a professional bicycle mechanic with the special tools, skills and
experience to inspect and service today's high-tech high-performance bicycles and their
components.
Aftermarket "Super Light" Components
Think carefully about your rider profile as outlined above. The more you fit the "shorten product
life" profile, the more you must question the use of super light components. The more you fit
the "lengthen product life" profile, the more likely it is that lighter components may be suitable
for you. Discuss your needs and your profile very honestly with your local 13 dealer. Take
these choices seriously and understand that you are responsible for the changes
you make.
Original Equipment Components
Bicycle and component manufacturers test the fatigue life of the components that are original
equipment on your bike. This means that they have met test criteria and have a reasonable
fatigue life.
It does not mean that the original components will last forever. They won't.
?
Need assistance?
SAVVY BIKES LIMITED, ICKNIELD STREET DRIVE, WASHFORD, WEST REDDITCH, WORCESTERSHIRE, B98 ODE
Ask your local 13 dealer
40
Advertisement
Table of Contents
