Halogen Lamps - Thermador PH30ZS Service Manual

PHZ Service Manual
The halogen lamp assemblies are 12 volt, 20 watt halogen bulbs. There are two light settings; normal, and dim.
These two settings are controlled by the step down transformer
LIGHTS
NOTE: Turn off the lights and fan. Allow the lights
to cool before handling. If new lights do not opera-
te, be sure lights are inserted correctly before calling
service.
Halogen Light Replacement
• Using a flat edge fr om a screwdriver or equivalent
tool, pry loose the lens cover as shown in Figure
3.
• Remove the damaged light and r eplace with a
new 12 Volt, 20 Watt (maximum) halogen light
made for a G-4 base. Follow package directions
and do not touch new light with bare hands.
• Reinstall the light and cover.

HALOGEN LAMPS

PAGE 1
Figure 3
Serviceab le Component