On-Screen Display Options - eMachines E202H User Manual

On-screen display options

6
Downloaded from ManualMonitor.com Manuals
Using Your eMachines Flat-Panel Monitor
Adjusting OSD settings
To adjust the OSD settings:
1
Press Auto. The display image is automatically adjusted to the ideal settings for your current
screen resolution.
2
Press Menu. The OSD opens.
3
Press < and > to highlight a setting, then press Menu to open the selected menu or setting.
You can configure settings in the following menus:
Menu Name Description
icon
Brightness and Adjusts the brightness and contrast
Contrast (by selecting User) or selects a color
mode (by selecting Scenario Mode).
Focus and Clock
Adjusts focus and clock settings.
Position
Adjusts horizontal and vertical
screen image position.
Color Temperature
Selects a warm, cool, or
user-defined color temperature.
Language
Selects the language for the OSD.
OSD Settings Adjusts the horizontal and vertical
position of the OSD and sets the
timeout.
Select input signal from D-Sub or
Input Source
DVI-D or HDMI
Select Wide mode setting for Full
Wide Mode
screen, Aspect ratio or 1:1 mode
DDC/CI Settings Turns DDC/CI support on or off.
Mode Information Displays the monitor's current
resolution, timing, input type, and
serial number.
Reset to Defaults
Resets all OSD settings to defaults.
Exit
Exits the OSD.
4
Press < and > to adjust the setting to the desired level or change the option.
5
When you have finished making all adjustments, press Auto repeatedly to exit.