Advertisement
Quick Links
Advertisement
Summary of Contents for HappyNerding SUPER SAWTOR
- Page 1 SUPER SAWTOR USER’S GUIDE...
-
Page 2: Module Description
Sawtor in its turn creates additional pitched shifted harmonics to the input signal, which gives a different sonic character compared to sawtooth animators. It is also should be mentioned that Super Sawtor is a completely analog circuit free of aliasing. -
Page 3: Specifications
SPREAD – scale dial is from 0 to 10. This control sets frequency spread of the additional harmonics generated by the Super Sawtor in relation to the pitch of the incoming signal. By increasing the “Spread” amount the user shifts additional harmonics proportionally further from the central pitch, so the unison effect becomes more dramatic and the sonically perceived beating rate increases as well. - Page 4 CV – scale dial is from 0 to 10. Any signal applied to the CV input will be internally added to the manually set “Spread” amount. So the “CV” knob changes the effect CV input signal has on the spread. Bipolar CV signal will allow to change the spread in both directions, while unipolar signal will change the spread only in one direction: positive signal will increase the spread and negative signal will decrease it.
- Page 5 (applied to the IN jack) to make the adjustable dry/wet effects. VCA can be used to mix the Super Sawtor’s output in response to some CVs: 1) velocity CV – the harder the notes are played the louder the Super Sawtor’s output;...