9/17/08 5:28 PM Page 4 Quick Start Thanks for purchasing the DLO TransDock micro. We will get you up and run- ning in a few easy steps. For more detailed instructions, please read Using TransDock micro [pg. 1. Plug your TransDock micro into your auto power outlet.
Setting Up Your TransDock micro 1. Turn on your car radio and set it to FM radio mode. To manually turn TransDock micro on or off while your car power is on, press and hold the dial for approximately 5 seconds.
To find an empty frequency using IntelliTune: then jumps to 103, look in the 102 frequencies for empty stations. 1. Press the dial on TransDock micro. This will activate the IntelliTune search. • Try tuning to a strong station, then backing down two frequencies - for...
Mode. To store your own preset stations, follow these simple steps: 3. Leave TransDock micro on the desired preset and tune your radio to the cor- responding frequency to begin broadcasting. 1. Using the dial, tune TransDock micro to the station you’d like to set –...
Turn the dial right for higher intensity and left for lower intensity. DIM LEVEL Dim Level controls the brightness of the OLED display while TransDock micro is inactive. Turn the dial right for higher intensity and left for lower intensity or completely off.
Tips + Troubleshooting My music is playing, but there seems to be a lot of static. If I leave TransDock micro plugged into my car’s power outlet, will it drain my Use IntelliTune to automatically find the optimal frequency to broadcast your car battery? Zune over your car’s FM stereo.
Input Voltage: 12 – 16 VDC Input Current: <300mA @ DC12V~16V TEMPERATURE Storage Temperature: -10° to 120° F (-23° to 49° C) Operating Temperature: -4° to 113° F (-20° to 45° C) 16 | DLO TRANSDOCK MICRO USER GUIDE | 17...
What DLO Will Do. If a defect exists, DLO will exchange the product, at its option, with a product that is new or has been manufactured from new or serviceable used parts and that is at least functionally equivalent to the original product. DLO will warrant a replacement product against defects in materials and workmanship for a period of ninety (90) days from the date of replacement.
Need help?
Do you have a question about the TransDock micro and is the answer not in the manual?
Questions and answers