Table of Contents
Advertisement
BEL DIGITAL AUDIO
Mixer mode operation
The mixer mode, identified by the amber LED, provides the facility to select
and mix a combination of any inputs and direct the result to any output. As with the
Matrix mode, gain and phase reversal can be applied to the selected inputs. In this
mode the LCD display will show a different screen for each output selected. The
display will indicate the level and phase reversal of each input together with the
current input for adjustment.
To operate in the Mixer mode first ensure that Mixer is selected in the setup
menu. The amber LED to the right of input switch 4 is active. Then select the output
required by depressing the appropriate numbered switch on the lower horizontal row.
The page corresponding to the output selected will be shown on the LCD display, the
current input channel is indicated by the corresponding LED and on the LCD. If
required, the input channel for adjustment can now be changed by depressing the
required switch on the upper row. The level of that channel can be adjusted by
depressing the nudge
display. A phase reversal can be applied to the input channel by depressing the INV
switch. The phase reversal is indicated by a
beside the corresponding input.
Note that the FAD, MAT and BYP buttons are inoperative in this mode.
©
2004 BEL Digital Audio Ltd.
∧ ∨
keys, the current level will be shown in dBs on the LCD
10
↓
symbol on the LCD display positioned
Bel2120B
Advertisement
Table of Contents
