Ford Focus Owner's Manual page 176

Inserting the tow ball arm
E71330
WARNING
The tow ball arm may only be
inserted when completely unlocked.
1. Pull out the plug.
2. Insert the tow ball arm vertically and
press it upwards until it engages (1).
Do not hold your hand near the
handwheel.
3. The green mark on the handwheel
must align with the green mark on the
tow ball.
4. To lock, turn the key anti-clockwise and
remove the key (2).
5. Pull the protecting cap from the key
bow and press it onto the lock.
Towing
Driving with a trailer
1
E71331
technician.
2
Before starting your journey, make sure
that the tow ball arm is properly locked.
Check that:
174
WARNING
If any of the below conditions cannot
be met, do not use the tow bar and
have it checked by a properly trained
the green marks are aligned
the handwheel (A) is correctly fitted
to the tow ball arm
you have removed the key (B)
the tow ball arm is securely positioned.
It must not move when jerked.
A
B