Advertisement
Advertisement
Table of Contents
Related Manuals for Agent 1100
Summary of Contents for Agent 1100
- Page 1 1100 Simplifying Communication Instruction Manual...
-
Page 2: Safety Instruction
INTRODUCTION Thank you for purchasing the Agent 1100 caller ID telephone with built in phone book. Please read through this manual before attempting operation of your new phone. SAFETY INSTRUCTION When using your telephone equipment, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons: 1. -
Page 3: Location Description
LOCATION DESCRIPTION... -
Page 4: Getting Started
GETTING STARTED The unit requires 3 X 1.5V AA batteries. Open the cover found underneath the phone and insert the batteries corresponding to the + and – symbols (For best performance consider using alkali batteries). Alternatively you can use an AC/DC power supply to power your phone instead of batteries (AC-DC adaptor, Input Alternating Current 220V, Output DC 9V, Current above 300mA, the output plug should be anode inside and cathode outside, please ensure your adaptor is connected via the correct connection node and securely plugged into the wall point). -
Page 5: Menu Setting
From Headset 1. Press the HEADSET key, dial the desired number. 2. To end the call, press the HEADSET key again and the call will be ended. Note: Please follow the manufacturer’s directions on how to correctly use your headset, as headset usage may differ. - Page 6 Use the Up or Down keys to toggle the available languages, pressing the SET key to confirm your selection. Area code settings At on-hook state, press the SET key then press the UP key twice, the option SET AREA CODE will now be displayed.
-
Page 7: Phonebook Input
At on-hook state, press the SET key then press the UP key six times, BABYCALL will now be displayed on the LCD screen. Press the SET key and you will see BABYCALL OFF displayed on the LCD screen to indicate the default is BABYCALL OFF. -
Page 8: Phonebook Edit
At on-hook state, press the SET key then press the UP key nine times, the LCD will display PHONEBOOK EDIT. Press the SET key and input the first name character of the item you want to edit, the LCD will display the first item of the character. -
Page 9: One-Touch Memory
To review an incoming number, press the PAUSE/VIP key to set it as VIP number. VIP numbers can’t be deleted individually; you should press the PAUSE/VIP key to cancel the VIP attribute first. And during DND state, the phone will ring four beeps to indicate a VIP number calling in. REVIEWING, CALLING BACK AND DELETING OUTGOING CALLS Reviewing At on-hook or off-hook state, use the OUT key to review the outgoing call records, each with called number... -
Page 10: Mute Function
Storing At on-hook state, pre-dialing a phone number or to review to an incoming call number, press the MEMORY key and followed by one of the number keys 0~9. Checking and dialing At on-hook state, press the MEMORY key and one of number keys 0~9 to check the number stored in the corresponding address, pick up the handset and press or RD key to dial it out. -
Page 11: Troubleshooting
If you want to delay the alarm, press the FLASH key, the alarm will terminated at once, but it will alarm again after 9 minutes, and it will repeat the process every 9 minutes within 117 minutes. If you don’t press any key during the alarm and let the alarm stop automatically, it will repeat the process of the alarm every 9 minutes within 117 minutes. - Page 12 ? No ring + Check if the phone is set at DND state (Press and hold the MUTE/DND key to cancel DND). ? Receive only + Check if P/T dialing mode is set correctly. ? Battery rust or leak + Remove the rust. If the battery leaks, replace with a new battery. ? Noise + Check if the connector is moist or rusty (Change the connector).
Need help?
Do you have a question about the 1100 and is the answer not in the manual?
Questions and answers