Channel Setup - Haier LE32B7500 Owner's Manual

Channel Setup

This setup is available in TV mode only.
Auto Search
Video
Update Scan
Audio
Manual search
Channel Edit
Clean Channel List
TV
Setting
Parental
Exit
MENU
Items Description
TV automatically searches for the channel in the available frequency band and stores
sequentially.
Select
Auto Search
Select Auto search and press
During auto searching Press
Updates your channel list by adding new/missed channels to the end of the list without disturbing
Update Scan
previously stored channels.Consequently, it takes more time than Auto channel scan.
Search for the channels manually and store it to the desired channel number.
Manual Search It can also be used for editing of channels searched by auto search if required.
Please refer to Manual Search description in next page for details.
Channel Edit Edit the selected channel, including channel swap, insert, delete, skip, channel name.
Clean Channel List Clear the channel list.
Note: Make sure you have connected RF signal cable before performing channel search.
Manual search description
1. Select TV menu and select Channels.
2. Select Manual Search and press OK key or ►arrow key to get Manual search sub-menu.
3. Select Start Frequency to input frequency you want to start
4. Select End Frequency to input frequency you want to end
5. Select Start Search and OK key or ►key to search
Video
Search for Analoge Channels
Audio
TV
Start Frequency (MHz)
Setting
End Frequency (MHz)
Start Search
Parental
Back
MENU
Select
Standard
TV menu.
OK
key or ► arrow key to tune channels automatically and store.
Menu
0
49.75
865.25
Select
Standard
Enter
OK
key to stop search.
%
Enter
OK
-15-
TV OPERATION