Label - Sony Ericsson W910 Working Instruction, Mechanical

Working Instruction, Mechanical

3.28 Label

Follow the 2.1.1 Disassembly instructions!
Read the old label and/or write the information into the
"Label make" program before removal.
Note the position of the label before removal
Heat up the label by using hot air, if needed.
Carefully remove the label without causing scratches
If there still are residues, clean the surface with isopropyl
alcohol
Check that the proper label format is loaded in the Zebra
printer.
Write a new label by using the program "Label make" and
check that the printing is OK.
Take the new label and place it onto the frame as in the
adjacent picture.
O !
NE LABEL ONLY IS ALLOWED
Follow the 4.1.6 Reassembly instructions!
3/000 21-1/FEA 209 544/129 A 27(34)
©
Company Internal Sony Ericsson Mobile Communications AB