ProScan PLEDV2031A User Manual page 15

4.6. Customizing the CHANNEL Se ngs
Select TV source for example. (Press SOUCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the
bu ons to select the CHANNEL.
3. Use the / bu ons to highlight an individual CHANNEL
change the se and press the MENU
The CHANNEL menu includes the following
Allows you to select antenna between Air and Cable.
Air/Cable If you select "Cable", the following items (Favorite, Show/Hide, Channel
NO., Channel Label and DTV Signal) are unable to use.
Use the
Auto Scan
to enter into the following menu.
If you select "Air" as input signal in Antenna item, you can press the
bu on to search the channels automa cally.
27
/
, use the / to
to exit.
:
The receivable channels will be stored automa cally.
When searching channels, press MENU to stop.
Use the bu on to highlight the "Auto Scan", then press the
bu on to search the channels automa cally.
The receivable channels will be stored automa cally.
When searching channels, press MENU to stop.
Allow you t add these channels which you desired as the favorite
Favorite channels. Use the
press the bu on to enter into the following menu.
Use the / bu ons to highlight the desired item, then press OK
bu on to add or remove the highlighted channel as favorite.
Channel list This feature shows the list of stored channels.
Allow you to show or hide the channels.
/
Show/Hide Use the bu ons to highlight the "Show/Hide" item, then press the
bu on to enter into the following menu.
Exit
/ bu ons to highlight the "Favorite" item, then
Exit
28