TABLE OF CONTENTS ENGLISH WARNINGS + SAFETY INFORMATION Page 2 PARTS LIST Page 3 RUMBLESEAT ASSEMBLY Page 4 RUMBLESEAT OPERATION Page 5 RUMBLESEAT CONFIGURATIONS + CARE Page 6 Please read these instructions carefully prior to assembly and use.
RumbleSeat must be removed and the main • Intended for use with UPPAbaby 2009 model year seat must be facing forward and in an upright VISTA stroller or later (VISTA will have a position.
1” below heads on RumbleSeat to lock in place. VISTA frame and snap. of screws. NOTE: Lock VISTA frame before attaching the RumbleSeat. NOTE: Brackets should “snap” and lock into the VISTA frame. UPPAbaby RumbleSeat Instruction Manual...
REMOvING RUMBLESEAT FROM vISTA FRAME STEP 1: Detach loop buckle from VISTA frame. Place foot STEP 2: Slide RumbleSeat down and lift out in on front cross-bar of VISTA frame and push on top of one motion. RumbleSeat toward main seat.
RumbleSeat CANNOT be used with the seat rear facing in reclined position. Spot clean gently with Dry flat and away from direct DO NOT bleach, iron CLEANING mild detergent. sunlight before re-use or storage. or dry clean. UPPAbaby RumbleSeat Instruction Manual...
Page 8
WARNINGS + GENERAL SAFETY INFORMATION Your UPPAbaby item is warranted to be free from any manufacturing defects for a period of 2 years from the date of purchase under normal use and in compliance with the operating instructions. This warranty extends ONLY to the original retail purchaser and is ONLY valid when supplied with proof of purchase.
Page 9
60 Sharp Street Hingham, MA 02043 781.413.3000 Model 0050 / Version 2 VISTA and UPPAbaby are trademarks and/or registered trademarks of Monahan Products LLC. All other trademarks are the property of their respective owners.
Need help?
Do you have a question about the Vista and is the answer not in the manual?
Questions and answers