Sony STR-SE581 Service Manual

SERVICE MANUAL
Manufactured under license from Dolby Laboratories
Licensing Corporation.
"Dolby" "Pro Logic" and the double-D symbol a are
trademarks of Dolby Laboratories Licensing
Corporation.
Audio power specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With 8 Ω load, both channels driven, from 40 - 20,000 Hz, rated 100 watts per
channel minimum RMS power, with no more than 0.5% total harmonic distortion
from 250 milliwatts to rated output.
Amplifier section
(8 Ω at 40 Hz - 20 kHz less than 0.5% total
Stereo mode
harmonic distortion)
100 W + 100 W
(8 Ω at 1 kHz, THD 0.5%)
Surround mode
Front: 100 W/ch
Center: (Pro Logic Mode)
100 W
Rear: 50 W/ch
(8 Ω at 1 kHz, THD 0.8%)
5.1/DVD INPUT* mode
Front: 100 W/ch
Center: 100 W
Rear: 50 W/ch
Frequency response PHONO: RIAA
equalization curve ±0.5 dB
TV/DBS, CD, TAPE/MD, VIDEO, 5.1/DVD
INPUT
10 Hz - 50 kHz ±1 dB
Inputs
Sensitivity Impedance
PHONO
2.5 mV
(MM)
CD 400 mV
TAPE/MD, 250 mV
TV/DBS,
VIDEO, 5.1/
DVD INPUT*
MICROFILM

SPECIFICATIONS

S/N (weighting network,
input level)
72 dB*
50 Kilohms
(A, 2.5 mV)
82 dB*
50 Kilohms
(A, 150 mV)
*78 IHF
STR-SE581
Outputs
Muting
BASS BOOST
TONE
FM tuner section
Tuning range
Antenna terminals
Sensitivity
Usable sensitivity
S/N
Harmonic distortion at 1 kHz
Separation
Frequency response
Selectivity
AM tuner section
Tuning range
Antenna
Usable sensitivity
S/N
FM STEREO/FM-AM RECEIVER
US Model
TAPE/MD REC OUT:
Voltage: 150 mV,
Impedance: 10 kΩ
VIDEO AUDIO OUT:
Voltage: 150 mV,
Impedance: 10 kΩ
WOOFER:
Voltage: 2 V,
Impedance: ± 10 kΩ
PHONES:
Accepts low and high impedance headphones
Full mute
+10 dB at 70 Hz
±8 dB at 100 Hz and 10 kHz
87.5 - 108.0 MHz
75 ohms, unbalanced
300 ohms, balanced
Mono: 18.3 dBf, 4.5 µV
Stereo: 38.3 dBf, 45 µV
11.2 dBf, 2 µV (IHF)
Mono: 76 dB
Stereo: 70 dB
Mono: 0.3%
Stereo: 0.59%
45 dB at 1 kHz
+0.5
30 Hz – 15 kHz dB
–2
60 dB at 400 kHz
531 – 1710 kHz
Loop antenna
50 dB/m (at 1,000 kHz)
54 dB (at 50 mV/m)
— Continued on next page —