Litele LC SERIES User Manual

Ccd barcode reader

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

LC SERIES

USER MANUAL FOR CCD

BARCODE READER

Table of Contents

Summary of Contents for Litele LC SERIES

Page 1 LC SERIES USER MANUAL FOR CCD BARCODE READER...
Page 2 LC SERIES USER MANUAL FOR CCD BARCODE READER...
Page 3 The scanner is programmable and ideal for Point Of Sale (POS) and document tracking applications. With the built-in decoder, Litele LC-Series CCD can recognize and decode most of the standard barcode, such as EAN-8/JAN-8, EAN-13/JAN-13, UPC A/E, full ASCII Code 39, Code 39, Interleaved 2 of 5, Code 93, EAN-128, Matrix 2 of 5 and Chinese Post Code, etc.
Page 4 Features: Built-in decoder allows automatic recogni- tion and decoding of most popular barcodes. Scanning speed up to 100 scans/sec. Obvious read LED indicator and nice tone beeper. Multiple communication interfaces to choose: USB,RS-232, AT/XT, PS/2 Keyboard Emulation. Superior optical performance with a mini- mum resolution of 0.127mm (5 mils).
Page 5 Warning Incorrect operation may damage or deduct the life- time of the Scanner. Please read this manual care- fully before you connect the scanner to the computer. Please make sure the computer power is off before you connect or disconnect the CCD Scanner with the com- puter (Exception: USB interface).
Page 6: Table Of Contents
CATALOG Components.........1 Apperance & Parts name.......1 Installation..........2 Usage..........2 Parameter Setting Flow Chat ....5 Common Q & A........4 System Setting........6 Scanning Mode Selection......7 Output Device.........8 RS-232C serial communication parmeters setting........8 Beeper Tone Selection ......11 Keyboard parameters setting ....12 Keyboard emulation parameters Setting..........12 Inter-Message Delay ......14 Inter-Character Delay ......15...
Page 7: Components
Component The following components will be found in the prod- uct package For LC-80KB, including: Scanner, User Manual For LC-80RS, including: Scanner, User Manual (Power Adapter) For LC-80USB, including: Scanner, User Manual For LC-90KB, including: Scanner, User Manual For LC-90RS, including: Scanner, User Manual (Power Adapter) For LC-90USB, including: Scanner, User Manual...
Page 8: Installation
Installation: Installation of LC-80/90 KB Scanner Make sure the Power of the computer is off; Unplug the keyboard; Connect the scanner cable (“ Y” - Wedge Cable) with the computer; Connect the keyboard to the scanner cable (“ Y” - Wedge Cable); Turn on the computer;...
Page 9: Usage
Usage: This product is used to scanning one-dimensional Barcode. When you scanning, the scanning window should be faced to the barcode. The red light will show up from the window when you push the button, adjust the dis- tance between barcode and the scanning window (Maximum 20 mm for LC 80, 180mm for LC 90).
Page 10 Setting: LC- Series Barcode scanner is programmable. Scanning a series of programming bar code labels can configure the scanners. This allows Encoding Options and Interface Protocols to be tailored to a specific application. The configuration is stored in non-volatile memory and will not be lost by remov- ing power from the scanner.
Page 11: Parameter Setting Flow Chat
Parameters Setting Flow Chat Start Scan Barcode “ Start of Configuration” Scan Barcode Settings (i .e.: “ RE SET T O ORIG INAL ” , “ BEEPING TONE — LOW” … ) Finish Setting? Scan barcode “ End of Configration”...
Page 12: Common Q & A
Common Q & A Problem Diagnosis Solution Description The interface of Replace the host host is damaged. interface. The connecting Check the cable, The scanner cable is damaged. repaired if damaged. does not respose when The scanner Send to the service is damaged.
Page 14 Start of Configuration System Parameters The reading of the “ RESET” La- bel turns all the parameters back to default values. RESET The reading of the “ ABORT” label discards all the parameters read prior to the “ EXIT(Start of ABORT Configuration)”...
Page 15: Scanning Mode Selection
Scanning Mode Selection The scanner becomes inactive as soon as the data is transmitted. It must be triggered to become active Trigger again. The scanner switch is pressed and double reading for the same bar code is not permitted. The scanner Turbo Trigger will be inactive after the switch is released.
Page 16: Output Device
Start of Configuration OUTPUT DEVICE RS232-C Key Board RS-232C SERIAL COMMUNICATION PARAMETERS SETTING BAUD RATE 19200 9600 4800 2400...
Page 17 1200 DATA BIT STOP BIT PARITY EVEN End of Configuration...
Page 18 Start of Configuration MARK SPACE NONE SERIAL PORT MESSAGE TERMINATOR NONE CR/LF HTAB...
Page 19 STX/ETX GOOD READ BEEPER TONE Medium High Disable End of Configuration...
Page 20 Start of Configuration SOUND DURATION Long Medium Short Very Short MESSAGE TERMINATIOR(FOR KEYBOARD) None CR/LF...
Page 21: Keyboard Emulation Parameters Setting
KEYBOARD EMULATION PARAMETERS SETTING IBM AT PS/2 30-80 IBM 5550 IBM 5295 Terminal IBM XT IBM 3477 IBM 5530-SC End of Configuration...
Page 22 Start of Configuration IBM 5530-ZC NEC 9801 IBM 3196 Terminal Apple MAC MOS_SYS PS2/30/56 IBM 3477 Terminal (Without break code) NEC 5200...
Page 23 MESSAGE DELAY NONE 100msec 500msec 1 Second CHAR DELAY NONE 10msec 20msec 50msec End of Configuration...
Page 24: Code 39 Parameters Setting
Start of Configuration CODE 39 PARAMETERS SETTING STANDARD CODE 39 FULL ASCII CODE 39 CHECK DIGIT NO CHECK DIGIT Calculate and Transmit Calculate but not Transmit ITF 2 OF 5 PARAMETERS SETTING NO CHECK DIGIT Calculate and Transmit Calculate but not Transmit...
Page 25: Upc/Ean Parameters Setting
CODABAR PARAMETERS SETTING A,B,C,D DC1~DC4 A/T, B/N, C/*, D/E UPC/EAN PARAMETERS SETTING UPC-E=UPC-A Disable Enable UPC-A=EAN-13 Disable Enable End of Configuration...
Page 26 Start of Configuration UPC-A LEADING CHARACTER Disable Enable UPC-A CHECK DIGIT Disable Enable UPC-E LEADING CHARACTOR Disable Enable UPC-E CHECK DIGIT Disable Enable...
Page 27: Issn/Isbn Conversion
EAN-13 CHECK DIGIT Disable Enable EAN-8 CHECEK DIGIT Disable Enable ISSN/ISBN CONVERSION Active Inactive READING CODE SELECTION CODE 39 Disable End of Configuration...
Page 28 Start of Configuration CODE 39 Enable ITF 2 OF 5 Disable ITF 2 OF 5 Enable CODABAR Enable CODABAR Enable CODE 93 Disable CODE 93 Enable CODE 128 Disable CODE 128 Enable...
Page 29 UPC-A Disable UPC-A Enable UPC-E Disable UPC-E Enable EAN-13 Disable EAN-13 Enable EAN-8 Disable EAN-8 Enable End of Configuration...
Page 30: Header And Trailer
Start of Configuration Chinese Post Code Disable Chinese Post Code Enable Matrix 25 Disable Matrix 25 Enable ADD HEADER AND TRAILER HEADER TRAILER REMOVE HEADER AND TRAILER HEADER...
Page 31: Code Length Selection
TRAILER CODE LENGTH SELECTION (Min value0) (Max value64) CODE 39 CODABAR End of Configuration...
Page 32 Start of Configuration ITF 2 OF 5 CODE 93 CODE 128 MATRIX 25...
Page 33: Bar Code Identifier Code Selection
BAR CODE IDENTIFIER CODE SELECTION Disable Enable CODE 93 ITF 2 OF 5 UPC-E UPC-A EAN-13 End of Configuration...
Page 34 Start of Configuration EAN-8 CODABAR CODE 39 CODE 128 Chinese Post Code Matrix 25...
Page 35 PREDEFINED BAR CODE IDENTIFIERS CODE 39 IDENTIFIER CODE ITF 2 OF 5 IDENTIFIER CODE CODE 93 IDENTIFIER CODE UPC-E IDENTIFIER CODE UPC-A IDENTIFIER CODE EAN-13 IDENTIFIER CODE EAN-8 IDENTIFIER CODE CODE 128 IDENTIFIER CODE CODE 39 IDENTIFIER CODE CHINESE POST CODE IDENTIFIER CODE MATRIX IDENTIFIER CODE End of Configuration...
Page 36: Appendix
Start of Configuration APPENDIX...
Page 37 End of Configuration...
Page 38 Start of Configuration “...
Page 39 & ‘ End of Configuration...
Page 40 Start of Configuration <...
Page 41 > End of Configuration...
Page 42 Start of Configuration...
Page 43 End of Configuration...
Page 44 Start of Configuration...
Page 45 End of Configuration...
Page 46 Start of Configuration...
Page 47 CODE 128 test UPC-A 34567 89123 UPC-E 1 123456 EAN-13 6 901234 567892 CODE 39 CODE39 ITF 2 OF 5 123456 ISBN 9 781234 567897...
Page 48 Warranty Litele warranties this product for a period of 12 months from the date of sold, provided that the product is operated under normal proper conditions. The warranty does not apply to any product that has beed subject to nisuse, accidental damage, unautho-...