Sending Data - Samsung SM-N915W8 User Manual

Connecting with other devices

Sending data

Allow data exchange when your device's NFC antenna touches the other device's NFC
antenna.
1
On the All apps screen, tap Settings → NFC and sharing → NFC, and then tap the NFC
switch to activate it.
Alternatively, open the quick settings panel and tap NFC to activate it.
2
Tap Android Beam or S Beam and tap the Android Beam or the S Beam switch to
activate it.
• Android Beam: Send data via Bluetooth.
• S Beam: Send data via Wi-Fi Direct. This feature is optimal for large data transfers.
3
Select an item and touch the other device's NFC antenna to your device's NFC antenna.
4
When Touch to beam. appears on the screen, tap your device's screen to send the item.
• Do not send copyright-protected data via S Beam. Doing so may violate copyright
laws. Samsung is not responsible for any liabilities caused by the illegal use of
copyrighted data.
• If both devices try to send data simultaneously, the file transfer may fail.
150