Related Manuals for Grand iUSB HUB
Summary of Contents for Grand iUSB HUB
- Page 1 GRAND iUSB HUB Share up to four USB devices on your network User’s Manual ISSUE: 2008/10/21 P/N: 3449900...
-
Page 2: Table Of Contents
USB printer in your living room from your bedroom. The 8. FAQ…………………………………………………..……... 18 Grand iUSB HUB can network your USB device to enhance economic efficiency. It is ideal for home office, small office or classroom use. -
Page 3: Hardware Overview
“Config.” section below. 5. Installation Step 1: Plug the power adapter into the Grand iUSB HUB. Step 2: Connect the Grand iUSB HUB to your network router by using the provided RJ-45 cable. Step 3: Install the USB Server program - Insert the Driver CD into your CD-ROM driver, double-click the folder (Grand iUSB HUB Driver) to open it. -
Page 4: Status Of Usb Servers & Devices
Orange Icon: Indicates the device is used by yourself. jam). Red Cross: Indicates the device is not supported by the iUSB HUB. Red Icon: Indicates the device is being used by someone else and it is unavailable. You can make a device request to the user (refer to 6.3). -
Page 5: Accessing A Usb Device
Step 2: Choose “Install the software automatically” option and then click on “Next” button to 6.2 Accessing a USB Device start installation. If you already have the drivers installed on the PC, then the installation will The USB Server allows you to share the resources, such as scanning function, of a complete by itself. -
Page 6: Making A Disconnect Request
Step 4: Click on “Finish” to complete the driver installation. Please note that you will have to 6.4 Server Configuration do this once and once only for each USB Server you add to your network. We allow the users to configure the settings of the USB Servers via the web-based UI. Select the target server on the tree view and then click on the “Config”... - Page 7 You do not need to provide a password for this operation if there is not password set. Please just leave it blank. Reset Device: To reboot the iUSB HUB. However, if there is a password, you must enter it for this function to work. Password is by default blank. So, unless a password is...
-
Page 8: Other Functions
Password Change: To change the password, you must enter current password, input Directly input the interval time, and click on Submit to allow the new interval taking new password and re-input new password for confirmation and then click on “Submit”. If effect. - Page 9 View: The tree view in the main dialog has two display modes: “Servers and Devices” Search: Clicking on the “Search” button triggers the program to immediately poll the mode and “Devices Only” mode. network for the status of all the servers and devices. The result will be updated to the tree view.
-
Page 10: Network Printer Wizard Software
7. Network Printer Wizard Software Step 3: Select the Manufacturer and Model of the shared printer from a drop down list, or click “Have Disk” if your printer came with an installation disk. The Network Printer Wizard software will allow you to use the shared printer without executing the USBServer. -
Page 11: Faq
8. FAQ Q: How come I don’t see any nodes on my tree view when I start up the program? Ans.: Your PC or the USB Server might not be connected to the network correctly, using a personal firewall on your PC might interfere with the performance of the USB Server Application. If your PC or the USB Server(s) is connected to the network correctly, press on “Search”...
Need help?
Do you have a question about the iUSB HUB and is the answer not in the manual?
Questions and answers