Advertisement
Quick Links
Advertisement
Summary of Contents for Playvision HDM-962
- Page 1 HDMI 1.4 Matrix 6×2 User manual\...
- Page 2 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. I. Introduction The HDMI matrix 6*2 with 4kx2k supported which allows HDMI signal from any of its six sources to be routed to and displayed on any of its two connected HDMI displays simultaneously.
- Page 3 Support MHL input, Share your smart phone photos, music and movies on the TV. Support PIP display function. Audio support: HDMI 1.4 compatible audio interface Dolby TrueHD DTS-HD Master Audio 7.1CH Full audio input and output support III. Package HDMI 1.4 Matrix 6*2------------------------------1PCS 5V/2A DC Power Supply Adapter---------------------1PCS Remote control---------------------------------------1PCS Operation Manual ----------------------------------1PCS...
- Page 4 Frequency Bandwidth 2.97Gbps Input Ports 6 x HDMI Female. Output port 2 x HDMI Female; 1x Toslink,1x Earphone HDMI Audio Output PCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1, D-TrueHD, DTS-HD Power Supply 5V/2A DC (US/EU standards, CE/FCC/UL certified) Human Body Model: ± 8kV (air-gap discharge) ESD Protection ±...
- Page 5 V. Operation controls and Functions Front Panel ON/OFF: Power on/off switch. Input LED: These red LED illuminate when the output select to the corresponding input. Audio EDID LED: These red LED illuminate when the audio EDID select to corresponding audio. ARC LED: This red LED illuminate when the ARC function open.
- Page 6 EDID: Press this button to select the 2.0CH,5.1CH,7.1CH audio output mode. ARC：Press this button to open or close the ARC function. RST: Press this button the matrix will reset to factory state(INPUT1, 2.0CH AUDIO MODE,ARC function closed) Rear Panel Input Source: These slot is where you connect the HDMI source output from DVD, PS3. HDMI OUT: This slot is where you connect the HDTV or monitor with HDMI cable.
- Page 7 Attention: 1. The Toslink and Stereo audio follow the OUT A HDMI audio. 2. The In6 （The sixth input port）support MHL input only,use MHL to HDMI Cable to connect smart phone and matrix. Remote control STANDBY: Press this button will standby or power on the matrix. Audio EDID: Press this button will Select the audio output mode (2.0CH,5.1CH,7.1CH), and the LED will indicate the corresponding state .
- Page 8 Select: Press this button will select the PIP source. Enter: Press this button will confirm the select PIP source. OUTA: Press these buttons will fast switch to select input source to HDMI OUTA. and the LED will indicate the corresponding input source. OUTB: Press these buttons will fast switch to select input source to HDMI OUTB.
- Page 9 VI. Application Example...
Need help?
Do you have a question about the HDM-962 and is the answer not in the manual?
Questions and answers