1. Manuals
  2. Brands
  3. IVIEW Manuals
  4. IP Camera
  5. CZ-537-IP
  6. User manual

IVIEW CZ-537-IP User Manual

Ir night vision network ptz cameras
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Rev. 3-2-2012
CZ-537-IP IR Night Vision
Network PTZ
Cameras

Advertisement

Table of Contents
loading

Summary of Contents for IVIEW CZ-537-IP

  • Page 1 Rev. 3-2-2012 CZ-537-IP IR Night Vision Network PTZ Cameras...

  • Page 2: Table Of Contents

    Contents 1 Instruction ..................... 1 1.1 Safety Instructions ................1 1.2 Warnings ................... 1 2 Feature ......................2 2.1 Product Features ................2 2.2 Specifications ................... 3 3 Installation Instruction .................. 4 4 Software Installation Instructions ..............6 4.1 Client User Instruction..............6 4.2 Main Interface ..................
  • Page 3 4.5.5 E-Mail ................16 4.5.6 Date/Time ................16 4.5.7 Alarm In ................16 4.5.8 Alarm Out................17 4.5.9 PTZ..................17 4.5.10 Video Channel ..............17 4.5.11 Audio Channel ..............17 4.5.12 User Management............. 17 4.5.13 Update ................18 4.6 LAN and WAN configuration ............18 4.7 Application for DDNS ..............

  • Page 4: Instruction

    1 Instruction These series of products can be widely used in intelligent building, bank security, urban roads, airport terminals and bus stations, and also are able to satisfy various demands from any square and activities occasion. 1.1 Safety Instructions  Make sure to read the use’s manual before using the product.

  • Page 5: Feature

    vibration. 2 Feature 2.1 Product Features * OSD menu; * 254 presets; * Auto flip; * Proportional zoom; * Day & night function; * RS485 communication; * Protocol and baud rate auto detected; * Soft address enables to set up the address and number of the camera; * Multiple scans: frame scan (speed adjustable);...

  • Page 6: Specifications

    2.2 Specifications Model IR IP Mini Variable Speed Dome Camera Help Selection Ceiling Power Supply DC12V/2A 50Hz/60Hz ≤15W Power Pan Speed 0.5°~50°/ sec Tilt Speed 0.5°~30°/ sec Pan Range 360°continuous Tilt Range 0°~90° auto flip Preset Pan Scan frame scan; 360° random scan; 360° continuous scan;...

  • Page 7: Installation Instruction

    Camera Module Support 10X Samsung, Sony camera module, compatible 38*38 CCD with fixed focus lens. 3 Installation Instruction 3.1 Installation A. Fixed the ceiling installation board with supplied screws. The board dimension as shows: B. Install the dome camera as shows:...
  • Page 8 3.2 System Connection 3.3 Dip Switch Setup Dip Switch as follows: Notice: Dip Switch Address Setup see appendix I...

  • Page 9: Software Installation Instructions

    4 Software Installation Instructions 4.1 Client User Instruction  System requirement  Operating System: Windows 2000/XP/Vista  Processor: Intel Pentium III, 1G or Higher (Pentium IV, 2G or Higher recommended)  RAM: 256 MB or more  Color Monitor: At least DirectX 8.1 or higher and 32M Display storage ...
  • Page 10 First user should add the IP/ Host name in the client software to open the surveillance picture. Steps are following: 1). Click the right side <Devices>button , will pop up: Note: If the device is not in the same network segment, Client could auto search but cannot connected.
  • Page 11 add one more IP in the same network segment. 2). For the device cannot search with network, user could add IP/Host manually. Click <Add>, the following will pop out: Note: Access to the Video/transfer server program, the Host chooses “Proxy”. 3).

  • Page 12: Toolbar

    4.3 Toolbar Zoom Focus Iris Preset Point Cruise Tracks From Left to right: Information; Talkback; Sound; Snapshot; Record; Color; Setup; Flip/Rotate; and Open.
  • Page 13 Zoom In/Out Navigation Focus+/- Preset Point Iris+/- Cruise Tracks Stop Cruise Edit Cruise-track Property Disconnect Display Devices channels, support Save/Delete 1/4/6/8/9/12/ Scene 16/20/25/30 window display...

  • Page 14: Image Quality

    4.3.1 Image Quality Image Quality could set Stream Style, Coding Style, Frame, Gaps between I-Frames.  <Coding Style>: ① Quality first; ② Rate first  <Up limit>: When the coding stale is Rate first, the actual coding would not exceed the value. The default value is 1024kps. ...

  • Page 15: Osd

    4.3.2 OSD OSD Menu could set channel information, time, the color and the position of text. 4.3.3 Shelter Shelter means cover one part of picture in the monitor screen. Hold <Ctrl> to select shelter area, click <Clear> key to clear the shelter. 4.3.4 Motion Detection ...

  • Page 16: Setting

     <Output to Channel>: You could choose the other channels except the nominated channel to display the motion detection result. 4.4 Setting 4.4.1 Client Setup Click , save the video path, alarm trigger recording time, alarm playback sound, and the scene you exist last time. It could be set several video paths, the default is saving in the first path, when the first path is full, and it will save in the next path.

  • Page 17: Playback

    4.4.5 Playback Click pop out the window, you could find the video file from the saved catalogue or event. Double click the video file to play. 4.4.6 Language Version software support Chinese English, click to switch. 4.4.7 Full Screen Click change to full screen mode, all action will be locked under this mode, input administrator password when quit.

  • Page 18: Address/Port

    4.5.1 Address/Port mask:255.255.255.0 ， Default address:192.168.0.233, subnet gateway:192.168.0.1, service port 8001. After change, system will register you restart your device to valid the setup. Change service name not need restart. Notice 1: IP address will valid only after device restart. Notice 2: When link 2 or more devices, need change related IP address and physical address.

  • Page 19: Multicast

    4.5.4 Multicast Use set device as needed to realize the multicast function. 4.5.5 E-Mail When choose mail service, the device will send event report and picture to the appointed mailbox when alarm or Motion Detection triggered.  <SMTP Server>: Follow your mailbox hints for related setup. ...

  • Page 20: Alarm Out

    4.5.8 Alarm Out  <Channel>: Allow setup name for choosing channel  <Valid period of time>: Setup alarm output time period. + mean valid period, - mean except the period 4.5.9 PTZ  <Video Channel>: Choose video channel.  <Address>: Matching the PTZ address with protocol. ...

  • Page 21: Update

    or number, Chinese is no supported, maximum length of user name or password is 10 characters. User is separated into four classes:  <Normal User>: Admit to brown monitor image, no authority to setup device and manage user.  <Junior User>: Admit to control PTZ/Lens, no authority to setup device. ...

  • Page 22: Application For Ddns

    firewall. (2) WAN manually search If users want to login in another subnet, the device can not automatically be searched. The video device should be manually added as the following steps: ① Register DDNS services from a DDNS ser vice provider. After applications a domain name will be assigned, and an account number and password will be obtained.

  • Page 23: How To Use Osd Menu

    】 download the client and Click【 control , then install it. Then input user name and password (default is admin) can get monitor page. 5 How to Use OSD Menu 5.1 Basic operation of Main menu ♦ Go Preset #95 enter into main menu. ♦...

  • Page 24: Main Menu

    ♦ Move the cursor to “BACK” and press “Iris open” to back to main menu. 5.2 Main Menu Call preset #95 enter the main menu: MAIN MENU SYSTEM INFORMATION ADDR SETTING MOTION PATTERNS CAMERA CRUISE SETTING IR SETTING DISPLAY SETUP RESTORE FACTORY DEFAULT REBOOT SYSTEM EXIT...

  • Page 25: System Information

    5.2.1 System Information SYSTEM INFORMATION 2400, N, 8, 1 ADDRESS SOFTWARE VERSION V5.2 BACK EXIT  <COM>: Shows current Baud rate.  <ADDRESS>: Shows current Camera ID for PTZ control, 0~255.  <SOFTWARE VERSION>: Shows current software version of camera. Notice: The system information can not be changed.

  • Page 26: Motion

    5.2.3 Motion MOTION FRAME SCAN POWER UP NONE PARK TIME PARK ACTION NONE BACK EXIT Frame Scan FRAME SCAN SET SCAN POSITION CLEAR FRAME SCAN FRAME SCAN SPEED BACK EXIT  <SET SCAN POSITION>: Set up scan range between two positions (Left/Right extreme position).

  • Page 27: Patterns

    enter below interface: SET FRAME SCAN RIGHT LIMIT POSITION IRIS OPEN TO CONTINUE 5.2.3.2 Clear Frame Scan CLEAR FRAME SCAN IRIS OPEN TO CONTINUE Move the cursor to “Clear Frame Scan” to enter, then press “Iris Open” to delete the extreme positions. 5.2.4 Patterns PATTERNS PATTERN NUMBER...

  • Page 28: Camera Setup

    5.2.5 Camera Setup We are using Samsung SDM-100P camera to explain below operation. MAIN MENU CAMERA LABEL WHITE BALANCE AUTO AUTO DETECTION FOCUS EXPOSURE ADDITIONAL MENU BACK EXIT Notice: “Up/Down” keys for option, “Left/Right” keys for details, “Iris Open” for sub-menu. ...
  • Page 29  <WHITE BALANCE>: WB Mode: Auto Trace / Manual / Auto (1) Auto Trace : Indoor/Outdoor, The camera can automatically adjust ambient light from1800K~10500K(Indoor: 3000~10,500K; Outdoor: 1,800~10,500K), to ensure the most nature image effect. AUTO TRACE WB AUTO TRACE WB MODE OUTDOOR EXIT (2) Manual: Close auto WB, adjust Red and Blue level manually.
  • Page 30 MOTION DETECTION ALARM SELECT REGION REGION MODE 20…|..………. BOTTOM 25….…|……. LEFT 20…|.………. RIGHT 40….……|…. EXIT Alarm: On/Off Region：1~4 Region Mode: On / Off  <FOCUS> FOCUS MODE AUTO ZOOM TRACE MODE ZOOM TRACE SPEED FAST DIGITAL ZOOM SHOW ZOOM INITIAL ZOOM POSITION LENS INITIALIZATION EXIT ♦...
  • Page 31  The target is very smooth( like car surface)  The brightness contrast of the target is not very clear.  Too strong high light or back light.  Too high contrast.  Some shade in front of the target. ①...
  • Page 32 cursor to “On”, then press “Iris Open” to set up. INITIAL ZOOM POSITION INITIAL ZOOM POSITION EXIT Zoom Range: X1~X10 ♦ <LENS INITIALIZATION>: press “Iris open/Set” key to initialize the lens. ♦ <EXPOSURE>: EXPOSURE BRIGHTNESS 25….…|……. IRIS AUTO SHUTTER —— SSNR SENS-UP EXIT...
  • Page 33 24X、32X、64X、128X、1/120000、1/60000、1/30000、1/10000、/1/7000、 1/5000、1/2500、1/1600、1/1000、1/700、1/500、1/250、1/100、1/50. MANUAL SHUTTER SHUTTER 1/50 EXIT Notice: Auto shutter setting only for manual iris mode.  <AGC>: High / Middle / Off / Manual Enhances image brightness automatically in case that luminance level of image signal is too low. Range: 5-41 LEVEL EXIT...
  • Page 34 ♦ <ADDITIONAL MENU>: ADDITIONAL MENU USER PRESET SETUP PRIVACY ZONE MASK DAY & NIGHT AUTO 1 SYNC. SYSTEM INTERNAL IMAGE ADJUSTMENT RE-BOOT EXIT ① USER PRESET SETUP: On / Off USER PRESET USER PRESET NUMBER NO 1 USER PRESET MODE SAVE CLEAR EXIT...
  • Page 35  <Focus>: Using direction keys to “Focus” and press “Iris/Open” key to set up. FOCUS MODE AUTO ZOOM TRACE MODE ZOOM TRACE SPEED FAST DIGITAL ZOOM SHOW ZOOM EXIT  <OTHER>: refer to below details. OTHER CAMERA TYPE AUTO TRACE BW MOTION DETECTION PRIVACY MASK DAY &...
  • Page 36 ② PRIVACY MASK: PRIVACY MASK GROUP SELECTION AREA SELECTION ZONE MODE COLOR 50…|..………. 50…|..………. BOTTOM 104….…|……. LEFT 50…|.………. RIGHT 98……|…… EXIT  <GROUP SELECTION>: 1~ 8  <AREA SELECTION>: 1~ 4 zones / group  <ZONE MODE>: On / Off ...
  • Page 37 ⑤ IMAGE ADJUSTMENT: IMAGE ADJUSTMENT FREEZE HORIZONTAL FLIP VERTICAL FLIP SHARPNESS 50….…|……. EXIT  <FREEZE>: Camera starts freezing the image of start point, as soon as camera stops at preset end point, camera starts display live images.  <HORIZONTAL FLIP>: image will flip 180°when you start up. Normal when shutdown.

  • Page 38: Cruise Setting

    5.2.6 Cruise Setting CRUISE SETTING CRUISE SETTING DWELL TIME (SECS) PRESET11 PRESET 1 PRESET12 PRESET 2 PRESET13 PRESET 3 PRESET14 PRESET 4 PRESET15 PRESET 5 PRESET16 PRESET 6 PRESET17 PRESET 7 PRESET18 PRESET 8 PRESET19 PRESET 9 PRESET20 PRESET10 BACK ...

  • Page 39: Display Setup

    lower than setting IR value. 81~254 could be optional.  <CURRENT LEVEL>: the current IR light value. Use direction key of CCTV Tester to modify preset and confirm by press “Iris/Open” key. 5.2.8 Display Setup DISPLAY SETUP PRESET LABEL P/T DEG BRIGHT DATA BACK EXIT...

  • Page 40: Trouble Shooting

    6 Trouble Shooting Troubles Reason Solution 1. The power supply DC12V is not 1. Correct the connection. No action connected correctly. 2. Check the power supply is when power on 2. The fuse is broken. connected, or confirms if the plug connects well. 3.

  • Page 41: Fast Control Chart

    7 Fast Control Chart Special Preset Function CALL + #95 Access main menu CALL + #82 Start frame scan function CALL + #83 Clear all Presets CALL + #84 Start pattern 1 CALL + #85 Start pattern 2 CALL + #86 Start pattern 3 CALL + #87 Start pattern 4...

  • Page 42: Appendix I Dip Switch Setup

    Appendix I DIP Switch Setup K1 DIP switch is an address switch, consist of 8 number, use 8421 binary code, max 255 address. When the switch is in the “ON” position, the number from 1~8 corresponding to 1, 2, 4, 8, 16, 32, 64, 128. For example, if you set 1, 3, 5, 7 switch to the “ON”...
  • Page 43 1 0 1 0 0 1 0 0 0 1 1 0 0 1 0 0 1 1 1 0 0 1 0 0 0 0 0 1 0 1 0 0 1 0 0 1 0 1 0 0 0 1 0 1 0 1 0 0 1 1 0 1 0 1 0 0 0 0 1 1 0 1 0 0...
  • Page 44 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 1 0 1 1 1 0 1 0 0 1 1 1 1 0 1 0 1 1 1 1 1 0 1 0 0 0 0 0 0 1 1 0 1 0 0 0 0 1 1 0 0 1 0 0 0 1 1 0...
  • Page 45 1 0 0 0 1 0 0 1 0 1 0 0 1 0 0 1 1 1 0 0 1 0 0 1 0 0 1 0 1 0 0 1 1 0 1 0 1 0 0 1 0 1 1 0 1 0 0 1 1 1 1 0 1 0 0 1 0 0 0 1 1 0 0 1...
  • Page 46 1 1 1 0 0 0 1 1 0 0 0 1 0 0 1 1 1 0 0 1 0 0 1 1 0 1 0 1 0 0 1 1 1 1 0 1 0 0 1 1 0 0 1 1 0 0 1 1 1 0 1 1 0 0 1 1 0 1 1 1 0 0 1 1...
  • Page 47 1 0 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Notice: some protocols and address start from 0, if you can not control the dome camera, try to do ±1 of address code.

Table of Contents