Download Print this page

Pinnacle A3623067 Owner's Manual

Powered subwoofer

Advertisement

Quick Links

Powered Subwoofer
Owner's Manual
©
2010 PINNACLE LOUDSPEAKERS

Advertisement

loading
Need help?

Need help?

Do you have a question about the A3623067 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Pinnacle A3623067

  • Page 1 Powered Subwoofer Owner’s Manual © 2010 PINNACLE LOUDSPEAKERS...
  • Page 3 ® We congratulate and thank you for choosing a PINNACLE subwoofer. Our subwoofers exemplify the best in modern audio technology, and are designed to produce remarkable amounts of deep bass. Please read this manual completely to ensure the best possible performance from your Home Theater or sound system.
  • Page 4 CONNECTIONS: Complete all wire connections in your Home Theater / sound system before powering up your subwoofer or your receiver (amplifier). Be sure to observe proper polarity for all speaker wire connections (+ to +, - to -). To obtain the best performance, use only speaker wire of 12, 14, or 16 gauge (available from your dealer).
  • Page 5 • If your receiver has no subwoofer output jack but has pre-amp left & right channel outputs you can connect your subwoofer directly to your receiver's pre-amp outputs using the L & R Line Input jacks. If your receiver uses jumpers to connect its pre-amp outputs with its amp stage inputs you will need to acquire two splitter cables (such as Radio Shack # 42-2535) to be able to hookup your sub while continuing to provide a signal to your receiver's amp stage inputs.
  • Page 6 There are two reasons to use this connection option. The first is if your receiver has no subwoofer output jack! The second is if your system would benefit from having the bass filtered out of the main speakers (if you have a Dolby Digital or DTS receiver you can achieve the same results electronically simply by configuring your main speakers as SMALL and connecting your sub using an RCA cable - see Connection Option #1).
  • Page 7: Very Important

    With high volume levels of certain types of signals, the subwoofer may be audibly strained. If you hear the subwoofer “breaking-up” or distorting, turn your receiver’s volume level down. ® • If you have any problems or questions please contact your PINNACLE dealer for further assistance.
  • Page 8: Troubleshooting

    TROUBLESHOOTING: No Sound only from Subwoofer - Please note that this subwoofer has a thermal protection feature which will shut off its amplifier if it gets too hot; it will turn itself back on when it has cooled sufficiently. Otherwise: Check subwoofer power / volume settings and all connections.
  • Page 10: Limited Warranty

    Parts replacement and labor will be performed at the discretion of Pinnacle Loudspeakers and will be provided free of charge unless (in the opinion of our service department, service representatives, or engineering department) the system has failed due to abuse or negligent operation.
  • Page 12 415 Oser Ave, Suite M Hauppauge, NY 11788 pinnacle@pinnaclespeakers.com www.pinnaclespeakers.com PR MAN QB REV0210...