Page 2
Thank you for purchasing the ZVS-380 Vehicle Security System, Please carefully read this Owners Manual to familiarise yourself with the operation of the alarm system. CONTENTS Arming / Disarming the Alarm System Page 2 Disarming the Alarm while the siren is sounding / Features Page 3 Features continued ……...
Page 3
Disarming the Alarm system if the siren is sounding.. If the alarm has been triggered and the siren is sounding, press Button 2 once to stop the siren from sounding. (Alarm remains armed) To deactivate the alarm system and unlock the doors (If connected to central locking) press Button 2 again.
Page 4
Valet / Service Mode - Valet / Service mode prevents the alarm from arming if the automatic arming feature is selected. Valet / Service Mode disables the alarm system. To activate Valet / Service mode, turn the ignition ON, close all the vehicles entry points (doors / boot / bonnet) and press and hold Button 2 for two seconds.
Page 5
SELECTABLE FEATURES The features listed below may be configured at the time of installation. These features can only be programmed by your authorised installer. Ignition Safety Door Lock / Unlock - If all doors are closed when the ignition key is turned to the ON position, after 5 seconds, all the doors will lock.
4. The alarm system will now be disarmed and the vehicle may be started. Override Button * OPTIONAL ACCESSORIES Zylux Microwave Sensor – Part No: ZVS-MW-2 (Detects movement inside the vehicle – Ideal for convertibles) Tilt Sensor – Part No: ZVS-TS1 (Detects vehicle being jacked up. Protects your wheels against theft) Mini Battery BackUp Siren –...
Need help?
Do you have a question about the ZVS-380 and is the answer not in the manual?
Questions and answers