Performing The Initial Setup; Initial Setup; Setting Up A Password - Samsung 6 series User Manual

05 Performing the initial setup

- The initial setup differs from model to model.
- Turn on the TV using the P button on the remote control or TV panel.

Initial setup

The initial setup dialogue box appears when the TV is first activated. Follow the on-screen
instructions to finish the initial setup process such as selecting the menu language, scanning
channels, connecting to the network, and more. During each step, either make a choice
or skip the step. You can manually perform this process at a later time in the
menu.
- If you connect any external device to HDMI IN (STB) before starting initial setup, the source
of your live TV signal is set to
scan all channels and stores them in the TV's memory.
- If you want to connect aerial cable to your TV, select
scan all channels and stores them in the TV's memory.

Setting up a password

>
System Change PIN
You can set a Personal Identification Number (PIN) to lock channels, reset the TV, and change
TV settings.
Changing the TV's password.
Run and then enter the current password in the password field. The default
Change PIN
1.
password is "0-0-0-0".
Enter a new password and then enter it again to confirm it. The password change is
2.
complete.
- If you forgot your PIN code, press the buttons in the following sequence to reset the PIN to
"0-0-0-0":
In Standby mode:
. After finishing with this process, you will not be able to
STB
→ 8 → 2 → 4 →
MUTE
English - 19
. In this case, you will be able to
Aerial
(On)
POWER
>
System Setup