Moving And Installing; Installing The Noise Protection Board; Removing The Transit Bolts - Currys Essentials C510WM13 Instruction Manual

INSTALLATION

Moving and Installing

Fix the Noise Protection Board onto the bottom of the machine BEFORE removing
the transit bolts.

Installing the Noise Protection Board

To reduce the noise produced by the washing machine, install the noise protection board.
1. Lay down the machine. Unscrew the four feet.
2. Fit the board onto the bottom of the machine. The four holes in the board should correspond to
the screw holes of the levelling feet.
3. Screw the four levelling feet back on to fix the noise protection board to the machine.
4. Stand the machine upright.

Removing the Transit Bolts

Three (3) transit bolts keep the interior of the washing machine in place while it is being moved.
They need to be removed before installation. Use a spanner (not included) and follow the instructions.
Do not run the washing machine without removing the bolts, as this
can cause excessive vibrations.
C510WM13_IB_final_130516_chris.indd 7
7
16/5/13 11:33 AM