Operation; Adding Detergent To Pressure Washer - GreenWorks GPW 1600 Operator's Manual

W A R N I N G
Do not allow familiarity with the product to make you careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
W A R N I N G
Never direct a water stream toward people or pets, or any electrical device. Failure to heed this warning
could result in serious injury.
APPLICATIONS
You may use this product for the purposes listed below:
Cleaning cars, boats, motorcycles, outdoor furniture, grills, and house siding.
AddING dETERGENT TO THE PRESSURE WASHER
Use only detergents designed for pressure washers; household detergents, acids, alkalines, bleached,
solvents, flammable materials, or industrial grade solutions can damage the pump.
Many detergents may require mixing prior to use. Prepare cleaning solution as instructed on the
solution bottle.
- Unscrew the bottle from the soap applicator.
- Place the bottle on the ground or other stable surface.
- Fill with pressure washer detergent.
- Screw the bottle back onto the soap applicator.
- Attach the soap applicator to the trigger handle
NOTE: Use a funnel, if needed, to prevent accidental spilling of the detergent outside the tank. If
any detergent is spilled during the filling process, make sure the unit is cleaned and dried before
proceeding.

OPERATION

(See Figure 8.)
EN - 15
Fig. 8