Advertisement
HARDWARE INSTALLATION
Broadcasts HDMI signal to 2 HDMI displays!
1.
Switch-Off all devices, including monitors.
2.
Connect to the receivers (Connect HDMI OUT2 to a TV is recommended)
3.
Connect ARC to an AMP (If HDMI OUT2 is connected to a TV)
4.
Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI In
5.
Plug-in 5V DC power supply
6.
Power On the HDMI monitors
7.
Power On the HDMI source
7 | Hardware Installation
NOTICE
1.
While connecting a new monitor to the Splitter, experiencing a short period of time without display might be
expected. The Splitter will do Automatic EDID learning which analyzes the newly connected monitor to see if the
EDID for the HDMI input is necessary to update!
2.
For firmware update through RS-232, users MUST turn the Power Off, set the dip switch to "ON", and then
connect an RS-232 cable between PC and device. Open the firmware update software, set the correct com port
and baud rate (57600 is recommended), click the "File" button to direct to the firmware HEX or BIN file, power on
the device and press "Program MCU" symbol to firmware update. Once update process is done, please power off
the device and set the dip switch back to "1".
8 | Notice
Advertisement
