Basic Operating Instructions; Using Your Htt-10-Crp - Interactive Health HTT-10-CRP Use & Care Manual

Basic Operating Instructions

Understanding your Controller
Your HTT-10-CRP is simple to operate using the handheld controller
included with your chair. Before you use your chair, we recommend that
you familiarize yourself with the remote control and the basic massage
functions. To begin using your HTT-10-CRP massage chair:
• Plug in the power cord.
• Turn the ON/OFF switch located on the back of the
HTT-10-CRP massage chair to the ON position.
1 Power ON Indicator
2 Adjust the length of the stroke based on your personal height (TALL or
NORMAL). Press shoulder height to change from Tall to normal height.
3 Kneading: Initial push starts kneading in low ( ) speed and spot position.
Second push changes kneading to fast speed ( ) . Third push changes
kneading to stop ( ) .
4 Spot: Push spot for a stationary massage in kneading or compression function.
Push Adjust Down or Up to move the massage disc to the desired location.
5 Compression: Initial push starts compression in low speed
spot position. Second push changes compression to fast speed
Third push changes to stop ( ) .
6 Partial: Press kneading or compression and then partial to have a
partial stoke up/down 3"
7 Rolling: Initial push starts rolling up/down in medium speed
Second push changes rolling in the fastest speed ( ) . Third push
changes rolling to slowest speed ( ) .
8 Percussion: Initial push starts percussion in slowest speed
in spot position. Second push changes percussion to fastest
speed . Third push changes percussion to stop .
( ) ( )
9 Adjust Manual Down: Manually moves massage disc to desired
location. This function is active for kneading and compression when
partial stroke or spot /stationary mode is selected, and active for
percusssion in spot /stationary mode.
10 Adjust Manual Up: Manually moves massage disc to desired location.
This function is active for kneading and compression when partial
stroke or spot /stationary mode is selected, and active for percusssion
in spot /stationary mode.
Program mode " A" is a continuous 15 minute program consisting
11
of main functions.
Program mode " B " is a continuous 15 minute program consisting
12
of a series of combined fuctions.
13 Auto recline Down: Moves the back rest down to a recline position.
Auto recline Up: Moves the back rest up to a upright position.
14
15 Stop/AutoPark: Stops all massage functions and parks the massage
discs in its highest position.
16 Calf Massage On/Off: Push On/Off and the calf massage will begin
in the slowest speed. Push a second time to shut calf massage off.
17 Calf Massage Select: Intial push changes the calf massage speed
from the slowest speed ( ) to the fastest speed ( ) . Third push
changes the calf massage to a programmed speed.
10
3
3
5
( ) and
( ) .
8
( ) .
9
( )
11
13
15
16

Using your HTT-10-CRP

As with all Interactive Health robotic massage
you can customize the massage to your own needs.
1
You can select the massage functions, pinpoint the
massage anywhere on your back, or let the massage
move up and down your spine automatically. And, you
can choose the automatic program mode that will run
2
a varied 3-4 minute or 7-8 minute massage session.
4
6
7
10
12
14
17
UP - DOWN MASSAGE MODES
® chairs,
Rolling
Description:
Oval-elliptical nodes slowly and gently move up and down
your back, near the spine, gently alternating side to side.
Feels like:
The hands of a therapist pressing firmly yet gently on
your muscles. First on one side of the spine, then on
the other.
Massage technique:
Emulates effleurage, the first part of a massage
performed by a professional massage therapist.
It is designed to warm-up and loosen the muscles to
relieve tension, and prepare the back for a deeper,
therapeutic massage.
Rolling
Benefits:
Relieves muscle tension; improves circulation and
relaxes the back.
Kneading
Description:
Massage nodes moving in small, circular motion on both
sides of spine simultaneously.
Feels like:
The thumbs or heels of the hand pressing firmly in a circular
motion on both sides of the spine.
Massage technique:
Emulates the thumb kneading performed by a massage
therapist or other professional. This second phase of
massage is slightly more intense than the rolling and is
Kneading
considered to be a more deep muscle massage.
Benefits:
Relieves tension and soreness by lifting and stretching
muscles; improves circulation and helps bring vital nutrients
to spinal area.
11