Ironton 5000G User Manual

5000G (11 LB.) GLASS DIGITAL SCALE
USER'S MANUAL
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS
before operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.
Item# 30737
Thank you very much for choosing an IRONTON™ product! For future reference, please complete
the owner's record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor strongly recommends this
machine is not modified and/or used for any application other than that for which it was
designed. If you have any questions relative to a particular application, DO NOT use the machine
until you have first contacted the distributor to determine if it can or should be performed on the
product.
For technical questions and replacement parts, please call 1-800-222-5381.

TECHNICAL SPECIFICATIONS

Measurements in three modes: grams, ounces and pounds
Max. capacity: 5000g, 176 oz., 11 lbs.
Weighing Increments: 1g, 0.01 oz., 0.001 lb.
Scale construction: ABS
Platform construction: Tempered glass
Platform diameter: 5 7/8in.
Operates on one lithium button cell CR2032 (included).

GENERAL SAFETY REGULATIONS

WARNING:
Read and understand all instructions.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors that cannot be built
into this product, but must be supplied by the operator.
• Keep the work area clean and dry. Damp or wet work areas can result in damage to the
product.
• Keep children away from work area. Do not allow children to handle this product.
• Always wear ANSI-approved safety glasses and heavy-duty work gloves during assembly
and use. Do not wear loose clothing or jewelry, which can get caught in moving parts.
• Store idle equipment. When not in use, tools and equipment should be stored in a dry
location to inhibit rust. Always lock up tools and equipment, and keep out of reach of children.
• Use the right tool for the job. Do not attempt to force small equipment to do the work of
larger industrial equipment. There are certain applications for which this equipment was
designed. It will do the job better and more safely at the capacity for which it was intended.
Do not modify this equipment, and do not use this equipment for a purpose for which it was
not intended.
• Check for damaged parts. Before using this product, carefully check that it will operate
properly and perform its intended function. Check for damaged parts and any other
conditions that may affect the operation of this product. Replace damaged or worn parts
immediately.
• Do not overreach. Keep proper footing and balance at all times to prevent tripping, falling,
back injury, etc.
• DO NOT use the equipment when tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating this equipment may result in serious
personal injury.
• Industrial applications must follow OSHA requirements.
5000G (11 LB.) GLASS DIGITAL SCALE
USER'S MANUAL
1 of 3