MAXTEK DH900 Quick Start Manual

Please study this guide. It is designed to help you start using your MAXTEK
wireless amplified headset quickly and efficiently. For full instructions and
functions please refer to the user guide.
Connecting the transmitter
• Connect the power adaptor to the mains outlet and the other end
• into the 'DC IN' port located on the transmitter's rear panel.
Charging receiver
• Insert the battery into the headset, making sure that it is in the correct
•polarity position.
• Place the headset into the charge port on the transmitter. The LED
• will light up red when charging and green once fully charged.
• This will take approximately 2 hours and 30 minutes.
• Insert the spare battery into the transmitter charge bay located on the
• right side on the unit.
After Sales Support
UK/N.IRELAND HELPLINE N
O
REP.IRELAND HELPLINE N :
O
WEBSITE: www.quesh.co.uk
EMAIL: enquiries@quesh.co.uk
Wireless Amplified Headset
: 01270 508538
1800 995 036
Model Number: DH900
INCLUDES:
• Transmitter Base • Mains Adaptor
• Headset • Assorted Ear Buds
• Assorted Adaptors • Microphone & Holder

Quick Start Guide

®