Opel Corsa Owner's Manual page 213

14. Take the label indicating
maximum permitted speed from
the sealant bottle and affix in the
driver's field of view.
15. Continue driving immediately so
that sealant is evenly distributed
in the tyre. After driving approx.
10 km (but no more than
10 minutes), stop and check tyre
pressure. Screw compressor air
hose directly onto tyre valve and
compressor when doing this.
If tyre pressure is more than
1.3 bar, set it to the correct value.
Repeat the procedure until there
is no more loss of pressure.
If the tyre pressure has fallen
below 1.3 bar, the vehicle must
not be used. Seek the assistance
of a workshop.
16. Stow away tyre repair kit in load
compartment.
Vehicles with tyre repair kit
under the floor cover
1. Take the tyre repair kit from the
compartment.
2. Remove the compressor.
Vehicle care
3. Remove the electrical connection
cable and air hose from the
stowage compartments on the
underside of the compressor.
211