Connection Pin for F'hoto Diode of Pi&up.
Pin Name l/O
Input Pin for Traddng Gain Control Signal from
TGL
Digital Signal Processor. TGL = H
I Input Pin for Traddng Off Control Signal from Digital
TOFF
Signal Processor. TOFF = H
TES
0 Output Pin for Track Error Sense Signal to Digital
Signal Processor.
HFL
I High Frequency Level Signal Use Detection
Main-Beam Position is on the pit or mirror.
I Input Pin for Sled Servo Off Control.
SLOF
I Signal from Digital Signal Processor.
41
RFSM
0 Output Pin for RF Signal.
I Connection Pin for Gain Setting of RF and
42
Constant Setting of 3T Compensation of the
EFM Signal with RFSM Pin.
0 Slice Level Control Signal is Output Pin.
43
It Control Level of Data-Slice by Digital Signal
Processor of the RF Waveform.
I Input Pin for Level Control of Data-Slice by
44
Function
Gain Low
OFF
Need help?
Do you have a question about the MCD-Z165F and is the answer not in the manual?
Questions and answers