Page 1
Gigabit Ethernet Media Converter (Two Fiber Ports and Four UTP Ports) user manual (Do not use until you read this manual carefully)
Page 2
Brief introduction Many thanks for purchasing Gigabit Ethernet media converter! This product supports 10/100/1000Base-T, 1000Base-X protocol, as well as full duplex and half duplex mode. This manual is for 10/100/1000M transceivers. The following purchasing guide is for customer’s reference. Purchasing guide for optical transceivers Model Specifications...
Page 3
Power line (built-in) User manual 1copy Please contact the dealer immediately for any loss or damage to the above items. Installation 1. Interface RJ-45 interface The transmission media adopts CAT5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire. Fiber interface All of two fiber interface is SFP fiber module.
Page 4
function status Describing Power LED Power is ON. Power is Fail. Fiber port signal detect LED Optical Signal Detected FX-SD (RIGHT-DOWN) No laser input. Fiber port link/action status LED Fiber link is ok. FX-LINK/ACT (LEFT-DOWN) Blink Acted Fiber link is fail. UTP port speed LED 3 Blinks 1000M speed...