Download Print this page

Crux RVCCH-75K Installation Instructions Manual

Rear-view camera & force rvc integration interface for chrysler & jeep vehicles 2014-up

Advertisement

Quick Links

INTERFACING SOLUTIONS
CHRYSLER
2015 - 2015 200
JEEP
2014 - 2015 Cherokee
IMPORTANT: THIS INTERFACE STORES THE VIN NUMBER UPON INSTALLATION AND
GETS CODED TO FUNCTION WITH THE SAME VEHICLE IN PARTICULAR. ONCE
INSTALLED IT CANNOT BE REUSED IN ANY OTHER VEHICLE.
PARTS INCLUDED
(1) CH-75K CAN Interface Module
(1) CH-75K 52-Pin T-Harness (2665)
(1) Instruction Sheet
TECH SERVICES
All our products are manufactured under strict quality control. Each device is being tested before shipment. If nevertheless do occur problems
or if you have technical questions, contact us directly:
Crux Interfacing Solutions Tech Support
1 (855) 822-1348 (Mon - Fri - 9:00 AM - 5:00 PM)
rev.060115
REAR-VIEW CAMERA & FORCE RVC
INTEGRATION INTERFACE
FOR CHRYSLER & JEEP VEHICLES 2014-UP
SAFETY PRECAUTIONS
1. Please read through the entire instruction manual before starting any of the installation procedures.
2. We recommend disconnecting the negative side of the battery until ready to code the vehicle.
3. Do not install any of the main modules near any major components or near the HVAC system,
as placing items near the HVAC may cause damage or overheating to the vehicle or interface.
4. We recommend not disconnecting any of the air bag connections behind the dash panels.
5. This product is under Crux's 1 year manufacturer's warranty. Warranty may be voided in the case where
the device shows proof of being opened or improper extreme force.
Time
1
RVCCH-75K
APPLICATION NOTES:
FOR UCONNECT 5" and 8.4"
DISPLAYS
THIS INTERFACE DOES NOT
OFFER VIDEO IN-MOTION.
DOES NOT INCLUDE CAMERA.
Contact Tech Support for more
information.
www.cruxinterfacing.com

Advertisement

loading

Summary of Contents for Crux RVCCH-75K

  • Page 1 4. We recommend not disconnecting any of the air bag connections behind the dash panels. 5. This product is under Crux’s 1 year manufacturer’s warranty. Warranty may be voided in the case where the device shows proof of being opened or improper extreme force.
  • Page 2 RVCCH-75K REAR-VIEW CAMERA & FORCE RVC INTEGRATION INTERFACE FOR CHRYSLER & JEEP VEHICLES 2014-UP INTERFACING SOLUTIONS INSTALLATION OVERVIEW TO FACTORY DISPLAY 52-PIN 52-PIN (male plug) (female plug) VIDEO (male plug) GREEN/ FORCE RVC OPTION CAM INPUT (female plug) RED/ POWER 12...
  • Page 3 RVCCH-75K REAR-VIEW CAMERA & FORCE RVC INTEGRATION INTERFACE FOR CHRYSLER & JEEP VEHICLES 2014-UP INTERFACING SOLUTIONS CONNECTING THE INTERFACE Follow these steps to properly install the CAN module Step 1 - Remove the factory display to gain access to the factory 52-Pin (RED) connector.
  • Page 4: Troubleshoot

    RVCCH-75K REAR-VIEW CAMERA & FORCE RVC INTEGRATION INTERFACE FOR CHRYSLER & JEEP VEHICLES 2014-UP INTERFACING SOLUTIONS CONNECTING THE INTERFACE Follow these steps to properly install the CAN module Step 3 - Connect the 8-Pin connector into the module. Step 4 - After connecting the module, set dip switches in the following order to activate the Rear-View Camera.
  • Page 5 RVCCH-75K REAR-VIEW CAMERA & FORCE RVC INTEGRATION INTERFACE TO FACTORY FOR CHRYSLER & JEEP VEHICLES 2014-UP INTERFACING SOLUTIONS DISPLAY 52-PIN (male plug) (fem CONNECTING THE REAR-VIEW CAMERA In order to activate the Rear-View Camera feature, make sure Dip switch number 2 is set to “ON”.
  • Page 6 RVCCH-75K REAR-VIEW CAMERA & FORCE RVC INTEGRATION INTERFACE FOR CHRYSLER & JEEP VEHICLES 2014-UP INTERFACING SOLUTIONS ACTIVATING THE FORCE REVERSE CAMERA In order to activate the FORCE REVERSE CAMERA feature, make sure Dip switch number 4 is set to “ON”.
  • Page 7 RVCCH-75K REAR-VIEW CAMERA & FORCE RVC INTEGRATION INTERFACE FOR CHRYSLER & JEEP VEHICLES 2014-UP INTERFACING SOLUTIONS COMPATIBLE RADIOS - ALL RADIO MUST BE 1-PIECE RADIOS (NO SEPARATE CD SLOT) 8.4” U-Connect 5” Uconnec t www.cruxinterfacing.com rev.060115...