1. Manuals
  2. Brands
  3. hotho Manuals
  4. Stove
  5. INSERT
  6. Installation and operating instrictions

hotho INSERT Installation And Operating Instrictions

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HOTHOUSE
INSERT
STOVE
Please fix label with serial number and stove
type here before putting manual into stove
Installation and Operating
Instructions
Please hand these instructions to the stove user when the installation is complete. Leave the stove ready for
operation and instruct the user in the correct use of the appliance and operation of controls.
Important: – This product must be installed by a suitably qualified installer.
Hothouse Inspired Products Ltd
Imperial Point
Express Trading Estate
Stonehill road
Farnworth
Bolton BL4 9TN
technical@hothouseproducts.co.uk
PLEASE READ ALL THESE INSTRUCTIONS CAREFULLY!
For safety reasons it is essential that your stove is correctly installed and operated. Hothouse cannot
accept responsibility for any fault or consequential problems arising through incorrect installation or
operation.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INSERT and is the answer not in the manual?

Questions and answers

Summary of Contents for hotho INSERT

  • Page 1 HOTHOUSE INSERT STOVE Please fix label with serial number and stove type here before putting manual into stove Installation and Operating Instructions Please hand these instructions to the stove user when the installation is complete. Leave the stove ready for operation and instruct the user in the correct use of the appliance and operation of controls.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Section Page No 1. List of Components 2. Component Identification and Installation 3. Installation Instructions Warnings and important safety information 4 Installation Information Chimney Ventilation Flue Draught Connection to Chimney Material Clearances Hearths Commissioning & Handover 5. Technical Data 6.

  • Page 3: List Of Components

    Fig 1 – Stove Tool 1. List of Components Description of Parts Hothouse Stove Assembly Tool Ash Pan Fixing bar Bag containing fixings Stove Operating Glove Touch up paint Spare rope Warranty Card Fig 2 – Hothouse Stove Assembly and controls 2.

  • Page 4: Installation Instructions

     Place the insert stove into position and mark the intended position of the fixing screw in the fireplace through the hole in the base of the appliance. Remove the stove , drill a hole and insert the rawl plug supplied.

  • Page 5: Installation Information

    Ventilation Adequate ventilation is ESSENTIAL for the safe and efficient operation of any solid fuel or wood burning appliance. Ventilation MUST be provided where required by the stove output or flue under-performance. Keep all ventilation clear and free of blockage. Health And Safety Precautions Handling Adequate facilities must be available for unloading and site handling.

  • Page 6: Connection To Chimney

    Material Clearances Safety Distances from Combustible Surfaces: Model Side Shelf Hothouse Insert 275mm 275mm In addition it is strongly recommended that any furniture or other combustible materials are kept at least 900mm clear from the front of the stove. Distances from NON-combustible materials: To conform with building regulations the fireplace recess walls should be at least 200mm thick or each rear leaf at least 100mm thick in the case of a cavity wall at the rear.

  • Page 7: Technical Data

    Advise the user on what to do should smoke or fumes be emitted into the room from the stove – see Safety Notes section. The user should be warned that they MUST use a suitable fireguard in the presence of children, aged and/or infirm persons.

  • Page 8: Cleaning

    Moving the sliding control towards the wide side of the arrow increases the burn rate whilst moving it towards the narrow side reduces it. Multifuel Grate This stove is fitted with a grate with a strong set of cast iron bars with suitable air slots and will burn most fuels.

  • Page 9: Re-Fuelling

    this curing in process you may notice an unpleasant smell whilst the finishes finally cure. It is non-toxic, but for your comfort we would suggest that during this period you leave all doors and windows open. First, open the primary and secondary air wash control fully. Load the firebox with plenty of starting fuel, i.e.

  • Page 10: Stove Dimensions

    8.0 Stove Dimensions All dimensions in mm unless otherwise stated. Dimensions are approximate and are subject to change without prior notice. Fig. 3 – Hothouse Insert Stove HD01 09/11...

  • Page 11: Frequently Asked Questions

    Frequently Asked Questions 1 Do stoves require a chimney? All of our multi fuel and wood burning stoves require a suitable chimney or professionally installed flue system. 2 How do I clean the chimney? You will require a chimney sweep to clean the chimney. It is essential to provide a dedicated chimney cleaning access door when installing the flue of the stove in some situations.

  • Page 12: Spare Parts List & Codes

    HD01 09/11...

Table of Contents