Download Print this page

Singer 15-91 Instructions For Use Manual

Electric sewing machine/ reversible feed/lock switch/ for family use

Hide thumbs Also See for 15-91:

Instructions for using manual (68 pages)

Parts list (51 pages)

Adjusters manual (21 pages)

Table Of Contents

Table of Contents

Names of Principal Parts of Machines
Description
Electrical Information
Motor
To Connect Machine to Electric Service Line
Singerlight
To Remove the Bulb
To Replace the Bulb
To Operate the Machine
Front View of the Machine
Needles and Threads
Chart Shoring the Relationship of Types of Fabrics, Thread and Needle Sizes and Machine Stitches to the Inch
To Set the Needle
Upper Threading
To Remove the Bobbin
To Wind the Bobbin
Removing the Bobbin Case
Winding the Bobbin
Adjustment of Bobbin Winder
To Thread the Bobbin Case
To Replace the Bobbin Case
Bobbin Case Threaded and Replaced
To Prepare for Sewing
Threads in Position to Commence Sewing
Drawing up the Bobbin Thread
To Commence Sewing
To Turn a Corner
Basting
To Sew Flannel or Bias Seams
To Remove the Work
To Regulate the Length of Stitch
Showing Lever for Reversing Direction of Feed and Regulating Length of Stitch
To Regulate the Direction of Feed
To Regulate Pressure on Presser Foot
Thread Tensions
To Regulate the Needle Thread Tension
To Regulate the Bobbin Thread Tension
To Disassemble the Needle Thread Tension
To Reassemble the Needle Thread Tension
If Correct Stitching Is Not Obtained
To Oil the Machine
Front View, Showing Oiling Points
Oiling Points at the Back of the Machine
End View Shoring Oiling Points
Oiling Points in Base of Machine
To Lubricate the Motor
Machine Working Heavily
To Clean the Stitch Forming Mechanism
To Remove the Shuttle
Showing Position of Shuttle for Removal from Machine
To Replace the Shuttle
Shuttle and Parts Removed from Machine
Sewing Suggestions
Darning or Embroidering
Adjustment for Darning or Embroidering
Darning in Process
Darning Finished
Instructions for Using the Attachments
To Attach the Foot Hemmer
To Start the Hem at the Edge
Starting Hem at very End of Material
Hemming Edge of Material and Pulling Back Threads While Sewing
To Make a Hemmed Seam with the Foot Hemmer
To Make a Felled Seam with the Foot Hemmer
To Hem and Sew on Lace in One Operation
Adjustable Hemmer
To Make Hems from 3/16 to 15/16 Inch Wide
To Make Hems Wider than 15/16 Inch
Multi-Slotted Binder
To Attach the Binder
To Insert the Binding in the Binder
To Insert the Garment in the Binder
To Adjust the Binder
Binding with Unfolded Binding
Piped Edge
Position of Garment and Binding When Piping Edges
Piping and Binding in One Operation
To Bind Outside Curves
To Bind Inside Curves
To Apply French Folds to Curves
Applying a French Fold
The Edge-Stitcher
To Adjust the Edge-Stitcher
TO Sew Lace Together
To Insert Lace or Ribbon
To Pipe with the Edge-Stitcher
To Apply Folded Bias Tape or Military Braid
To Stitch a Wide Hem
To Make a French Seam
To Tuck with the Edge-Stitcher
To Shirr with the Gathering Foot
Principal Parts of the Ruffler
To Attach the Ruffler
To Adjust the Ruffler for Gathering
To Make a Ruffle and Sew It to a Garment in One Operation
Correct Positions for the Materials
To Make a Ruffle and Attach It with a Facing in One Operation
To Pipe a Ruffle
To Adjust the Ruffler for Plaiting
To Adjust the Ruffler for Group Plaiting
To Oil the Ruffler

Quick Links

1 Names of Principal Parts of Machines
2 Needles and Threads
3 Upper Threading
4 To Oil the Machine
Download this manual

Singer 15-91 Instructions For Use Manual

Quick Links

Related Manuals for Singer 15-91

Related Products for Singer 15-91

Table of Contents